NVIDIA GeForce RTX 4090 - Graphics Card Manual

Also See for GeForce RTX 4090:

Advertisement

NVIDIA GeForce RTX 4090 - Graphics Card Manual

SYSTEM SPECIFICATIONS

Thank you for choosing the NVIDIA GeForce RTX 4090 graphics card. Before you begin, please review the following System Specifications to ensure your PC has the appropriate hardware and software for your new graphics card.

System Specifications

  • Motherboard:
    PCI Express graphics slot required.
  • Clearance:
    Must have space for 304mm (L) x 137mm (W) x 61mm (H) card. One additional slot clearance in front of the fans is recommended for better airflow.
  • System Power Supply:
    • 850 W power rating minimum.
    • Supported power connector configurations:
      • At least three PCIe 8-pin cables (with RTX 4090 PCIe Gen 5 Power Connector Adapter).
      • One 450 W or greater PCIe Gen 5 Cable (16-pin).
  • Operating System:
    • Microsoft Windows 11 64-bit recommended, or Microsoft Windows 10 64-bit April 2018 Update v1803 or newer.
    • Linux, 64-bit.
  • Driver Installation: 2 GB of available disk space required for driver installation.

EQUIPMENT

The following equipment is included in the NVIDIA GeForce RTX 4090 graphics card box.

warning Attention: Use only the included NVIDIA power connector adapter for your GeForce RTX 40 Series Founders Edition graphics card.

HARDWARE INSTALLATION

PRODUCT OVERVIEW

  1. Turn off your computer, disconnect the power cord and remove any existing graphics card(s).

warning Attention: It is very important that you wait until the graphics card has cooled before taking the card out of the system.

  1. Remove three slot covers if there was no existing graphics card.
    Remove three adjacent slot covers that correspond to the PCI Express slot you are installing the graphics card in.
  2. Install the GeForce RTX 4090 graphics card into the primary PCI Express x16 slot on your motherboard.
    Install your GeForce RTX 4090 into the Primary PCI Express x16 slot (the Primary slot is the one closest to the CPU).
    HARDWARE INSTALLATION - Step 1

warning Attention: This GPU card should not be installed with the I/O brackets facing downwards.

  1. Connect the 16-pin plug of NVIDIA power connector adapter to the power receptacle on the top of the GeForce RTX 4090 graphics card.
    Connect at least three independent dedicated cables with 8-pin PCI Express plugs from the system power supply to the NVIDIA power connector adapter.
    HARDWARE INSTALLATION - Step 2 - Connect power

warning Attention: Use only the included NVIDIA power connector adapter for your GeForce RTX 40 Series Founders Edition graphics card

  1. Reinstall the covers on your computer and reconnect any cables previously removed.

CONNECTING TO THE DISPLAY

CONNECTING TO THE DISPLAY

  1. Connect the display(s) to the graphics card.
  2. Reconnect your power cord to the PC.

SOFTWARE INSTALLATION AND CONFIGURATION

With the hardware installed, the final step is to install the GeForce Experience software to update your drivers and optimize your games.

  1. Download and install GeForce Experience software.
    • Go to http://www.geforce.com/geforce-experience and click Download Now.
    • Accept the NVIDIA software license agreement by selecting Agree and Continue. GeForce Experience software begins to install.
    • Select Close to finish the installation.
  2. Optimize your installed games.
    • Open GeForce Experience and click Scan for Games and click OK to scan your installed games.
    • Click on Optimize All to optimize your game settings.
  3. Get the latest drivers.
    • Open GeForce Experience, log in, and select the Drivers tab.
    • Select Download Driver. Your GPU driver begins to download.
    • Select Express Installation when the download finishes. GeForce Experience begins to install the graphics driver.

information Note: It may take several minutes for the installation to take place. Your screen may go blank for a few seconds one or more times during installation. This is normal.

  • Click CLOSE when the driver install completes.
  1. Congratulations! Your GeForce graphics card is now ready to use!

information Note: If you have any questions about your NVIDIA product you can Chat live with NVIDIA Customer Care at www.nvidia.com/support or call 1-800-797-6530 (US) or 0800 404 7747 (UK).

www.nvidia.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download NVIDIA GeForce RTX 4090 - Graphics Card Manual

Advertisement

Need help?

Need help?

Do you have a question about the GeForce RTX 4090 and is the answer not in the manual?

Questions and answers

Table of Contents