Infineon EVAL PMG1 S3 DUALDRP Quick Start Manual

QUICK START GUIDE
EVAL_PMG1_S3_DUALDRP Kit
EVAL_PMG1_S3_DUALDRP is an evaluation kit for EZ-PD™ PMG1-S3 USB Power Delivery (PD) MCU. It is an
evaluation platform featuring two high-voltage USB-C PD ports with Dual Role Power (DRP) functionality.
The EVAL_PMG1_S3_DUALDRP kit can be used as an evaluation platform to design products that use two
USB-C PD ports with DRP and need a microcontroller with CAPSENSE™ capability to implement di erent
functionalities. The kit supports the USB PD 3.1 Extended Power Range (EPR) mode and can sink up to
140 W (28 V, 5 A) of power on each port simultaneously in Sink mode. In USB PD Source mode, this kit
supports Standard Power Range (SPR) mode and can simultaneously provide up to 100 W (20 V, 5 A) of
power on each port. The kit provides the option to bypass the onboard PD regulator and connect to an
external regulator for 140 W EPR operation in source mode.
KitProg3
KitProg3 USB
Type-C port (J1)
KitProg3 status
LED (LED1)
KitProg3 power
LED (LED2)
KitProg3 mode
switch (SW1)
Power selection
jumper (J5)
Power LED (LED4)
DC Output terminal
4.75 V-29.4 V,
5 A Port 0 (J9)
USB Type-C
Port 0 (J10)
PD regulator output
selection jumper
Port 0 (J16)
User LED (LED3)
1x17 header (J6)
www.infineon.com/EVAL_PMG1_S3_DUALDRP
CAPSENSE™
BUTTON1
LED6
LED11 LED7 LED8
DC Input terminal
24 V, 10 A (J11)
Reset switch
(SW2)
CAPSENSE™
BUTTON2
LED9 LED10 LED12
1x17 header (J21)
CAPSENSE™
CAPSENSE™ SLD1 – SLD5
1x18 header (J20)
1x34 header (J7)
User switch (SW3)
DC Output terminal
4.75V-29.4 V,
5 A Port 1 (J15)
USB Type-C Port 1 (J14)
PD regulator output
selection jumper
Port 1 (J17)
EZ-PD™ PMG1-S3
Controller
(CYPM1321-97BZXI)
User LED (LED5)
DC Input barrel jack
24 V, 10 A (J12)