Download
Share
Print this page
  1. Manuals
  2. Brands
  3. X-pole Manuals
  4. Fitness Equipment
  5. A-FRAME
  6. Instruction manual

X-pole A-FRAME Instruction Manual

Hide thumbs Also See for A-FRAME:

Advertisement

Quick Links

Download this manual
www.XPOLE.com
Instruction
Manual
Please Read Fully
Before Installation

Advertisement

loading
Need help?

Need help?

Do you have a question about the A-FRAME and is the answer not in the manual?

Questions and answers

Related Manuals for X-pole A-FRAME

Summary of Contents for X-pole A-FRAME

  • Page 1 www.XPOLE.com Instruction Manual Please Read Fully Before Installation...
  • Page 2 THIS BEFORE OPENING YOUR PACKAGE To get the best from your A-FRAME – with SAFETY being the utmost priority – it is extremely important that you READ & FOLLOW the Instruction Manual from beginning to end and most importantly, understand it! Follow the simple but explicit instructions in this manual to get the best results from your A-FRAME.
  • Page 3 Mis-using the A-FRAME can be dangerous, not only to the user but also to property and anyone close to the A-FRAME. The use of an A-FRAME is always at the user’s discretion, and it is the user’s responsibility to check the A-FRAME is assembled correctly &...
  • Page 4 The Product X-Pole's new Aerial A-Frame is perfect for Aerial Fitness, Yoga, Aerial Hoop/Lyra, Hammock, Silks, Static Trapeze & Suspension Training. The A-Frame can be used from 2255mm (89") up to 3480mm (137") with multiple heights being selectable in-between. Adjustable/Multiple Heights using the telescopic legs – can be used indoors or outdoors.
  • Page 5 Fig. (2.2) 3480mm (11.42ft) 2255mm (7.5ft) When the A-FRAME is at its lowest height, it will require The A-FRAME could be extended from its lowest a floor area of 3.6 Sq.M (38 Sq.Ft) and when fully height of 2255mm (89 Inches) to a height of 3480mm extended will require an area of 8.9 Sq.M (95 sq-ft).

  • Page 6: Checking The Parts

    Checking The Parts Please check the contents of your A-FRAME with the contents (Fig 3.1) If anything is missing or damaged, please contact your point of purchase or call your local X-POLE office immediately (contact details on the back page).

  • Page 7: Removing The Packaging

    Fig. (4.1) Push the pin in & pull out the Leg connectors at the same time. It is recommended that 2 people unpack the A-Frame and that care is taken to lift correctly. Push pin in & pull out foam...
  • Page 8 Tail of Pin Head of Pin Head of pin outside of A-Frame 1. Lay the top bar on the ground as illustrated above. 2. Insert the leg starting with the hole at the bottom in the Leg Connector. Place the leg into the Leg Connector and line up the holes on the legs with the holes in the Leg Connector.
  • Page 9 Head of pin outside of A-Frame As the A-FRAME will be assembled on the floor and then lifted into position, it is important to allow enough space to do so. When lifted into position, make sure the feet are flat, by gently shaking the 2 legs each person is holding and slowly pulling outwards.
  • Page 10 *Strop / Sling available from your local X-Pole dealer or point of purchase. Fig. (7.4) Extended Top Bar Note: Optional 2 Metre (6.6 ft) Top Bar can be purchased to widen your A-Frame. Please contact X-Pole or your local point-of-sale for further details. Copyright© Vertical Leisure Ltd. 2024 Version 2.0...
  • Page 11 LEADERS IN POLE & AERIAL FITNESS Fig. (7.5) Centre Point 700mm Tabless Hoop 1400mm Figure 8 *Carabiners & Strops Sold Seperately. Carabiner Swivel Carabiner Strop Tabless Hoop Note: We strongly recommend to rig Aerial Hoops using a choked strop method as shown above. Fig.
  • Page 12 Note: Hammock method is shown using a daisy chain choked over the top bar A-Frame Weight and Loadings Capacity The X-POLE A frame is a light weight, portable, frame which has been designed for home and light studio use for Aerial Fitness.
  • Page 13 (Head of Pin outside) Remove both pins at one side of the A-Frame, as illustrated in figure: . With one person lifting – the legs can then be extended and pinned back into position (please ensure that the pins are positioned in the inside of the A-Frame & the legs are pinned back into position using the adjustment line to align).
  • Page 14 ® LEADERS IN POLE & AERIAL FITNESS Attachment Of The Straps Fig. (9.1) Insert loops into the strap opening Pull the strap to the centre of the hook Insert pin through the leg hole at the desired position. Clip the hook onto the pin. Note: The straps can be attached to any pin, even if it is being used to lock the height of the legs.
  • Page 15 LEADERS IN POLE & AERIAL FITNESS Filling & Attaching Sand Bag Now that the A-FRAME has been fully assembled and the straps attached, it is now time to secure it in place using the additional sand/weight bags. Fig. (10.1) Fig. (10.2)
  • Page 16 ® LEADERS IN POLE & AERIAL FITNESS Dismantling The A-Frame Fig. (11.1) Press down Feed strap to loosen 1. Remove the sand bags. 2. Remove the straps. Fig. (11.2) Note: Leave the pins to one side, they will be needed again to secure the legs prior to packing it away.
  • Page 17 5. Now lay the A-FRAME down so the top bar is touching the floor. Fig. (12.2) 7.
  • Page 18 ® LEADERS IN POLE & AERIAL FITNESS Dismantling The A-Frame (Continued) Fig. (12.3) Push the pin in & pull out the leg connector at the same time. Push the pin in & pull out the leg connector at the same time.

  • Page 19: Warranty

    If X-POLE is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, X-POLE may elect to refund the purchase price in exchange for the return of the product.