What You Need To Know - Flair Puck & Smart Vent Install Manual

★ What you need to know

What you need prior to installation
1. One Flair Bridge
2. One Puck for each room with Smart Vents. A Flair room can be a physical room, or a
group of rooms.
3. Small phillips head screwdriver
If you plan to wire Smart Vents to AC power, complete Setup with batteries. You'll
remove the
What you need during installation
1. Username / password for your smart thermostat account*
2. Brand / model of mini split remote control(s)**
3. Post-it notes and a pen
* When using Flair's Mirror Mode to mirror a smart thermostat set point and mode to
mini splits - can be ecobee, Nest, Carrier/Bryant or Honeywell WiFi-connected.
** Email us at support@flair.co
brand and model of the remote control - and pictures of the front and back of the remote.
General Setup Flow
1. Power on Flair devices
2. Install Flair App
3. Run Flair Setup
4. Test System
5. Add users
support@flair.co
batteries prior
if you want us to check mini split compatibility. Send the
to installing in the duct.
support.flair.cos