Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lencore Silver
Summary of Contents for Lencore Silver
-
Page 2: Table Of Contents
OPERATIONS MANUAL Silver (Model AG47) Document Number: 200-0019 Rev A Table of Contents IMPORTANT SAFETY INSTRUCTIONS ......................1 Safety Symbol and Message Conventions ....................2 Battery Cautions ............................2 Function ..............................3 Features and Capabilities ..........................3 Installation ..............................3 Nomenclature and Functions ........................ -
Page 3: Important Safety Instructions
1. IMPORTANT SAFETY INSTRUCTIONS RISK OF ELECTRIC SHOCK- DO NOT OPEN THE UNIT. THERE ARE NO SERVICABLE COMPONENTS INSIDE. Read these instructions. • • Keep these instructions. Instructions are to be framed and placed adjacent to the control unit for ready reference. -
Page 4: Safety Symbol And Message Conventions
2. Safety Symbol and Message Conventions Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could result from mishandling. Before operating your product, read this manual first and understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards. CAUTION WARNING Indicates a potentially hazardous situation... -
Page 5: Function
6. Installation Silver is designed to be mounted into a standard 19-inch rack. The unit includes two rack ears for mounting. Mount the unit into the equipment rack using two screws supplied with your rack for each rack ear. Keep one rack unit clearance above the unit for cooling. -
Page 6: Connections
Channels. 2. Data In (RJ45) Connect an MPI (music page interface) or 5. IR Eye the previous Silver unit if required. Point the hand-held IR remote at the IR Eye to make adjustments as required. 3. Data Out (RJ45) The Data out connector would connect to 6. -
Page 7: Usage
IR Input must follow 568B. 3. Speaker Channel Connections. Connect only Lencore speakers to the speaker channel connectors using cat5e cable with RJ45 connectors. The wiring for the speaker cable must follow 568B. Note: Refer to the specific speaker type data sheet for the number of speakers allowed on each speaker channel and for speaker mounting requirements. -
Page 8: Optional Equipment
The addition of Lencore’s Head-End G8350 can be used to add networked functionality. The Head-End includes System Manager software for additional functions and control. The Silver unit can be used for background music and paging with the addition of an MPI (Music Page Interface) model G1505. -
Page 9: Wiring Speaker Cable
Additional Silver units can be added when additional speakers are needed to cover a larger area. A wall-mountable IR keypad can be added to allow adjustments of volume levels from the keypad for sound masking, music, and paging from any office. The IR keypad also includes an IR receiver for the hand-held remote control. -
Page 10: Wiring Data Cable (Optional)
Wiring Data Cable (optional) Data Cable (RJ45) 568B Data cable connections are from the head-end or MPI to the Silver unit. The pin-out on the RJ45 is 568B. The RJ45 connectors for the Data cables are non-shielded. PINS - 568 B... - Page 11 For technical support, please email support@lencore.com Lencore Acoustics LLC 516-682-9292 info@lencore.com www.lencore.com The information contained herein is proprietary to Lencore Acoustics LLC and copyright protected. No part of this manual can be copied, used or distributed without prior authorization from Lencore Acoustics LLC ©Copyright 2024...
Need help?
Do you have a question about the Silver and is the answer not in the manual?
Questions and answers