ASROCK G41C-GS User Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. G41C-GS
  6. User manual

ASROCK G41C-GS User Manual

Hide thumbs Also See for G41C-GS:
Table of Contents

Advertisement

Quick Links

Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2009 ASRock INC. All rights reserved.
ASRock G41C-GS / G41C-S Motherboard
Published December 2009
1 1 1 1 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G41C-GS and is the answer not in the manual?

Questions and answers

Related Manuals for ASROCK G41C-GS

Summary of Contents for ASROCK G41C-GS

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Page 2 Motherboard L Motherboard L Motherboard Layout (G41C ayout (G41C ayout (G41C ayout (G41C- - - - - GS / G41C GS / G41C GS / G41C GS / G41C-S) Motherboard L Motherboard L ayout (G41C GS / G41C PS2_USB_PWR1 Jumper Primary SATAII Connector (SATAII_1;...
  • Page 3 1Gbps connection LAN Port To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on your system. Please follow below instructions according to the OS you install.
  • Page 4 100Mbps connection LAN Port To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “VIA HD Audio Deck” tool on your system. Please follow below instructions according to the OS you install.

  • Page 5: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.
  • Page 6 Specifications Specifications Specifications Specifications Specifications Platform - Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm ® - LGA 775 for Intel Core 2 Extreme / Core 2 Quad / Core 2 Duo / Pentium ® Dual Core / Celeron ®...
  • Page 7 - 1 x Serial Port: COM1 - 1 x VGA Port - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jack: Line in / Front Speaker / Microphone Connector - 4 x SATAII 3.0 Gb/s connectors (No Support for RAID and...
  • Page 8 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Page 9 USB flash drive or hard drive must use FAT32/16/12 file system. 12. The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a conve- nient way for the user to record the OC settings and share with others.
  • Page 10 15. EuP, stands for Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required.

  • Page 11: Cpu Installation

    Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 12 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion.
  • Page 13 1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS.
  • Page 14 Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR2/DDR3 DIMM pair in the slots of the same color. In other words, you have to install identical DDR2 DIMM pair in Dual Channel (DDRII_1 and DDRII_2; Yellow slots;...
  • Page 15 Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 16 2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane width graphics cards.
  • Page 17 2-pin jumper (see p.2 No. 23) Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply.
  • Page 18 Floppy Connector (33-pin FLOPPY1) (see p.2 No. 21) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 11)
  • Page 19 HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A.
  • Page 20 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

  • Page 21: Driver Installation Guide

    STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk. STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII connector. STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard disk. 2 . 8 2 .
  • Page 22 ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double- click on the file “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.
  • Page 23 1. Einführung 1. Einführung 1. Einführung Wir danken Ihnen für den Kauf des ASRock G41C-GS / G41C-S Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 24 Spezifikationen Spezifikationen Spezifikationen Spezifikationen Spezifikationen Plattform - Micro ATX-Formfaktor: 24.4 cm x 19.8 cm; 9.6 Zoll x 7.8 Zoll ® - LGA 775 für Intel Core 2 Extreme / Core 2 Quad / Core 2 Duo / Pentium ® Dual Core / Celeron ®...
  • Page 25 - 1 x Serieller port: COM 1 - 1 x VGA Port - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - Audioanschlüsse: Line In / Line Out / Mikrofon Anschlüsse - 4 x SATAII-Anschlüsse, unterstützt bis 3.0 Gb/s...
  • Page 26 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 27 Durch Betriebssystem-Einschränkungen kann die tatsächliche Speichergröße weniger als 4 GB betragen, da unter Windows ® 7 / Vista™ / XP etwas Speicher zur Nutzung durch das System reserviert wird. Unter ® Windows OS mit 64-Bit-CPU besteht diese Einschränkung nicht. Die Maximalspeichergröße ist von den Chipshändler definiert und ®...
  • Page 28 USB-Flash-Laufwerk oder die Festplatte das Dateisystem FAT32/16/12 benutzen muss. 12. Allein der Name – OC DNA* – beschreibt es wörtlich, was die Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv entwickeltes Dienstprogramm, das Nutzern eine bequeme Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie Anderen mitzuteilen.
  • Page 29 15. EuP steht für Energy Using Product und kennzeichnet die Ökodesign- Richtlinie, die von der Europäischen Gemeinschaft zur Festlegung des Energieverbrauchs von vollständigen Systemen in Kraft gesetzt wurde. Gemäß dieser Ökodesign-Richtlinie (EuP) muss der gesamte Netzstromverbrauch von vollständigen Systemen unter 1,00 Watt liegen, wenn sie ausgeschaltet sind.
  • Page 30 +5VSB (Standby) zu setzen (siehe S.2 - No. 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 2-Pin jumper) 2-Pin jumper (siehe S.2 - No.
  • Page 31 Floppy-Laufwerk (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2 - No. 21) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. andard (EuP aktivieren) Primärer IDE-Anschluss (Blauer) (39-pin IDE1, siehe S.2 - No. 11)
  • Page 32 Seriell-ATAII-Anschlüsse Diese vier Serial ATA (SATA II) -Anschlüsse (SATAII_1: siehe S.2, Punkt 16) SATAII_1 SATAII_3 unterstützen interne SATA- (SATAII_2: siehe S.2, Punkt 15) oder SATA II-Festplatten. Die (SATAII_3: siehe S.2, Punkt 12) SATAII_2 SATAII_4 aktuelle SATAII-Schnittstelle (SATAII_4: siehe S.2, Punkt 13) ermöglicht eine...
  • Page 33 Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie nachstehend beschrieben an der Front-Audioanschlussleiste: A.
  • Page 34 (siehe S.2 - No. 4) Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...
  • Page 35 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.
  • Page 36 1.1 Contenu du paquet Carte mère ASRock G41C-GS / G41C-S (Facteur de forme Micro ATX: 9.6 pouces x 7.8 pouces, 24.4 cm x 19.8 cm) Guide d’installation rapide ASRock G41C-GS / G41C-S CD de soutien ASRock G41C-GS / G41C-S Deux câble de données Serial ATA (SATA) (en option)
  • Page 37 - Prise en charge de la technologie Hyper-Threading (voir ATTENTION 1) - Prend en charge la technologie Untied Overclocking (voir ATTENTION 2) - Prise en charge de la technologie EM64T par le CPU ® Chipsets - Northbridge: Intel - Southbridge: Intel ®...
  • Page 38 - 1 x port série: COM 1 - 1 x port VGA - 4 x ports USB 2.0 par défaut - 1 x port LAN RJ-45 avec LED (ACT/LED CLIGNOTANTE et LED VITESSE) - Jack audio: entrée ligne / sortie ligne / microphone...
  • Page 39 - FCC, CE - Prêt pour EuP (alimentation Prêt pour EuP requise) (voir ATTENTION 15) * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 40 Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 25 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 41 Pour améliorer la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique entre le CPU le dissipateur lors de l’installation du PC.
  • Page 42 électrique dont l’efficacité électrique 5Vsb est supérieure à 50% pour une consommation de courant de 100 mA, votre système sera conforme à la norme EuP. Le réglage par défaut (codes pin1 et pin2) est activé pour être conforme à EuP. Si vous souhaitez désactiver cette fonction de sauvegarde de l’énergie, vous pouvez changez les codes pin2 et pin3.
  • Page 43 Par défaut (FSB1, cavalier à 3 broches, voir p.2 N° 25) Si vous adoptez un CPU FSB1333 et Mémoire DDR3 1333 sur cette carte mère, il vous faut régler les cavaliers. Veuillez relier les bornes 2, et 3 avec les cavaliers FSB1.
  • Page 44 En-tête USB 2.0 A côté des quatre ports USB 2.0 par défaut sur le panneau (USB6_7 br.9) E/S, il y a deux embases USB (voir p.2 No. 17) 2.0 sur cette carte mère. Chaque embase USB 2.0 peut (USB4_5 br.9) prendre en charge 2 ports USB (voir p.2 No.
  • Page 45 1 2 3 4 ien que cette carte mère offre un support de (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur.
  • Page 46 (voir p.2 No. 4) Bien que cette carte mère fournisse un connecteur de courant ATX 24 broches, elle peut encore fonctionner si vous adopter une alimentation traditionnelle ATX 20 broches. Pour utiliser une alimentation ATX 20 broches, branchez à...
  • Page 47 BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.
  • Page 48 1. Introduzione Grazie per aver scelto una scheda madre ASRock G41C-GS / G41C-S, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità...
  • Page 49 1.2 Specifiche Specifiche Specifiche Specifiche Specifiche Piattaforma - Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm Processore - LGA 775 per Intel ® Core 2 Extreme / Core 2 Quad / Core ® ® ® Duo / Pentium...
  • Page 50 - 1 x Porta COM - 1 x Porta VGA - 4 x porte USB 2.0 già integrate - 1 x porte LAN RJ-45 con LED (LED azione/collegamento e LED velocità) - Audio Jack: Line In / Line Out / Microfono Connettori - 4 x connettori SATAII 3.0Go/s (Non supporta le funzioni “RAID”...
  • Page 51 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 52 * Quando si utilizza una CPU FSB533 su questa scheda madre,funzionera a DDR3 533 se si adotta un modulo di memoria DDR3 800. * Se viene usato la CPU FSB1333 e modulo di memoria DDR3 1333 su questa schedamadre, sara‘ necessario regolare I jumper. Prega fare riferimento a pagina 55 per l‘impostazione dei jumper.
  • Page 53 12. Il nome stesso del software – OC DNA – dice di cosa è capace. OC DNA, una utilità esclusiva sviluppata da ASRock, fornisce un modo comodo per registrare le impostazioni OC e condividerle con gli altri. Aiuta a salvare le registrazioni di overclocking nel sistema operativo e semplifica la complicata procedura di registrazione delle impostazioni di overclocking.
  • Page 54 Nota: CLRCMOS1 consente di pulire i dati nella CMOS. I dati nella CMOS includono informazioni del setup del sistema, come per esempio la password di sistema, la data, l’ora, e i parametri del setup di sistema. Per pulire I parametri di sistema e resettare ai parametri di default, spegnere il computer e scollegare l’alimentatore, poi collegare il jumper sul CLRCMOS1 per 5 secondi.
  • Page 55 (33-pin FLOPPY1) (vedi p.2 Nr. 21) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (Blu) (39-pin IDE1, vedi p.2 Nr. 11)
  • Page 56 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 57 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 58 Con questa scheda madre, c’è in dotazione un connettore elettrico ATX a 24 pin, ma può funzionare lo stesso se si adotta un alimentatore ATX a 20 pin. Per usare l’alimentatore ATX a 20 pin, collegare l’alimentatore con il Pin 1 e il Pin 13.
  • Page 59 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. Per informazioni più dettagliate circa il Setup del BIOS, fare riferimento al Manuale dell’Utente (PDF file) contenuto nel cd di...
  • Page 60 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 61 1.2 Especificación Especificación Especificación Especificación Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 19,8 cm, 9,6” x 7,8” ® Procesador - LGA 775 para Intel Core 2 Extreme / Core 2 Quad / Core ® ® ® 2 Duo / Pentium Doble Núcleo / Celeron...
  • Page 62 - 1 x puerto serial: COM1 - 1 x Puerto VGA - 4 x puertos USB 2.0 predeterminados - 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y LED de VELOCIDAD) - Audio Jack: Line In / Line Out / Micrófono...
  • Page 63 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 64 * Al usar un FSB533-CPU en esta placa base, se ejecutara a DDR3 533 si adquiere un modulo de memoria DDR3 800. * Si adopta la CPU FSB1333 y módulo de memoria de DDR3 1333 en esta placa base, necesita a ajustar los jumpers. Por favor consulte a la página 67 para una correcta configuración de los jumpers.
  • Page 65 ASRock Instant Flash. Ejecute esta herramienta y guarde el archivo correspondiente al sistema BIOS nuevo en su unidad flash USB, unidad de disco flexible o disco duro para poder actualizar el BIOS con sólo pulsar un par de botones, sin necesidad de preparar un disco flexible adicional ni utilizar complicadas utilidades de programación.
  • Page 66 3 para habilitar +5VSB (vea p.2, N. 1) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 2 pins) jumper de 2 pins (vea p.2, N.
  • Page 67 Si usa la CPU FSB1333 y Memoria DDR3 1333 en esta placa base, necesitará ajustar los puentes. Por favor, conecte el pin2, pin3 para los puentes FSB1. Si no lo hace así, la CPU y Memoria podría no funcionar correctamente en esta placa base.
  • Page 68 3.0 Gb/s. Cable de datos de Ambos extremos del cable serie ATA (SATA) pueden conectarse al disco duro SATA / SATAII o la (Opcional) conexión de la placa base. Cabezal USB 2.0 Además de cuatro puertos USB 2.0 predeterminados en el...
  • Page 69 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 70 (24-pin ATXPWR1) (vea p.2, N. 4) A pesar de que esta placa base incluye in conector de alimentación ATX de 24 pins, ésta puede funcionar incluso si utiliza una fuente de alimentación ATX de 20 pins tradicional. Para usar una fuente de alimentación ATX de 20 pins, por favor, conecte su fuente de alimentación usando los Pins 1 y 13.
  • Page 71 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora.
  • Page 72 Gratos por comprar nossa placa–mãe G41C-GS / G41C-S, um produto confiável feito com ASRock um estrito controle de qualidade consistente. Com um excelente desempenho, essa placa é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade.
  • Page 73 1.2 Especificações 1.2 Especificações 1.2 Especificações 1.2 Especificações 1.2 Especificações Plataforma - Formato Micro ATX: 9,6 pol. x 7,8 pol., 24,4 cm x 19,8 cm ® - Socket Intel Dual Core Core 2 Extreme / Core 2 Quad / ®...
  • Page 74 - 1 x porta COM1 - 1 x porta VGA - 4 x portas USB 2.0 padrão - 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED VELOCIDADE) - Áudio Jack: saída / entrada de linha / microfone + porta...
  • Page 75 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 76 91. Devido às limitações do sistema operativo, o tamanho real da memória pode ser inferior a 4 GB uma vez que uma parte desta está reservada ® para utilização pelo sistema operativo no âmbito do Windows ®...
  • Page 77 12. O próprio nome do software – OC DNA diz-lhe literalmente aquilo de que é capaz. OC DNA, um utilitário exclusivo desenvolvido pela ASRock, proporciona uma forma conveniente para o utilizador gravar as definições OC e partilhar com outros. Ajuda-o a guardar o seu registo de “overclocking”...
  • Page 78 (veja a folha 2, No. 1) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 2 pinos) jumper de 2 pinos (veja a folha 2, No.
  • Page 79 Se adoptar o CPU FSB1333 e memória DDR3 1333 nesta placa-mãe, precisa de ajustar os jumpers. Queira por favor posicionar os jumpers FSB1 para o pino 2 e pino 3. Caso contrário, o CPU e memória pode não funcionar devidamente nesta placa- mãe.
  • Page 80 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 81 (Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá funcionar mesmo sem a função de controlo de velocidade da ventoinha. Se pretender ligar uma ventoinha de 3 pinos para CPU ao conector de ventoinha do CPU nesta placa-mãe, por favor, ligue-a aos pinos 1-3.
  • Page 82 20 pinos. Para usar a fonte de alimentação de 29 pinos, por favor ligue a sua fonte de alimentação com o Pino 1 e o Pino 13. Instalação da Fonte de alimentação ATX de 20 Pinos Conector ATX 12 V Note que é...
  • Page 83 Se desejar acessar o Utilitário de Configuração do BIOS depois do POST, reinicie o sistema pressionando <Ctl> + <Alt> + <Del>, ou pressionando o botão de reinício no chassi do sistema. Para as informações detalhadas sobre o Utilitário de Configuração do BIOS, consulte o Manual do Usuário (arquivo PDF) no CD de suporte.
  • Page 84 ASRock G41C-GS / G41C-S Motherboard...
  • Page 85 ® ® ® ® ® ® ® ® ASRock G41C-GS / G41C-S Motherboard...
  • Page 86 ® ASRock G41C-GS / G41C-S Motherboard...
  • Page 87 “ ” ® ® ® ASRock G41C-GS / G41C-S Motherboard...
  • Page 88 “ ” “ ” ® ® 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 ASRock G41C-GS / G41C-S Motherboard...
  • Page 89 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock G41C-GS / G41C-S Motherboard...
  • Page 90 “ ” “ ” “ ” “ ” 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock G41C-GS / G41C-S Motherboard...
  • Page 91 SATAII_1 SATAII_3 SATAII_2 SATAII_4 1 0 3 1 0 3 1 0 3 1 0 3 1 0 3 ASRock G41C-GS / G41C-S Motherboard...
  • Page 92 1 0 4 1 0 4 1 0 4 1 0 4 1 0 4 ASRock G41C-GS / G41C-S Motherboard...
  • Page 93 1 2 3 4 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock G41C-GS / G41C-S Motherboard...
  • Page 94 “ ” “ ” 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock G41C-GS / G41C-S Motherboard...
  • Page 95 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock G41C-GS / G41C-S Motherboard...
  • Page 96 ® ® ® ® ® ® ® ® 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock G41C-GS / G41C-S Motherboard...
  • Page 97 1 0 9 1 0 9 1 0 9 1 0 9 1 0 9 ASRock G41C-GS / G41C-S Motherboard...
  • Page 98 ® ® “ ” 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock G41C-GS / G41C-S Motherboard...
  • Page 99 ® ® ® ® ® ® ® 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock G41C-GS / G41C-S Motherboard...
  • Page 100 – 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 ASRock G41C-GS / G41C-S Motherboard...
  • Page 101 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock G41C-GS / G41C-S Motherboard...
  • Page 102 SATAII_1 SATAII_3 SATAII_2 SATAII_4 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock G41C-GS / G41C-S Motherboard...
  • Page 103 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock G41C-GS / G41C-S Motherboard...
  • Page 104 1 2 3 4 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock G41C-GS / G41C-S Motherboard...
  • Page 105 ® ® 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock G41C-GS / G41C-S Motherboard...
  • Page 106 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock G41C-GS / G41C-S Motherboard...
  • Page 107 ® ® ® ® ® ® ® ® 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock G41C-GS / G41C-S Motherboard...
  • Page 108 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock G41C-GS / G41C-S Motherboard...
  • Page 109 ® ® ® ® ® 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock G41C-GS / G41C-S Motherboard...
  • Page 110 ® ® ® ® 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock G41C-GS / G41C-S Motherboard...
  • Page 111 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 ASRock G41C-GS / G41C-S Motherboard...
  • Page 112 SATAII_1 SATAII_3 SATAII_2 SATAII_4 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 ASRock G41C-GS / G41C-S Motherboard...
  • Page 113 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5 ASRock G41C-GS / G41C-S Motherboard...
  • Page 114 1 2 3 4 1 2 6 1 2 6 1 2 6 1 2 6 1 2 6 ASRock G41C-GS / G41C-S Motherboard...
  • Page 115 ® ® 1 2 7 1 2 7 1 2 7 1 2 7 1 2 7 ASRock G41C-GS / G41C-S Motherboard...
  • Page 116 1 2 8 1 2 8 1 2 8 1 2 8 1 2 8 ASRock G41C-GS / G41C-S Motherboard...
  • Page 117 1 2 9 1 2 9 1 2 9 1 2 9 1 2 9 ASRock G41C-GS / G41C-S Motherboard...
  • Page 118 ® ® ® ® ® ® ® ® 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock G41C-GS / G41C-S Motherboard...
  • Page 119 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 ASRock G41C-GS / G41C-S Motherboard...
  • Page 120 ® ® ® ® ® 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 ASRock G41C-GS / G41C-S Motherboard...
  • Page 121 ® ® ® ® 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 ASRock G41C-GS / G41C-S Motherboard...
  • Page 122 1 3 4 1 3 4 1 3 4 1 3 4 1 3 4 ASRock G41C-GS / G41C-S Motherboard...
  • Page 123 SATAII_1 SATAII_3 SATAII_2 SATAII_4 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 ASRock G41C-GS / G41C-S Motherboard...
  • Page 124 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock G41C-GS / G41C-S Motherboard...
  • Page 125 1 2 3 4 1 3 7 1 3 7 1 3 7 1 3 7 1 3 7 ASRock G41C-GS / G41C-S Motherboard...
  • Page 126 ® ® ® 1 3 8 1 3 8 1 3 8 1 3 8 1 3 8 ASRock G41C-GS / G41C-S Motherboard...

This manual is also suitable for:

G41c-s

Table of Contents