Table of Contents
Advertisement
Quick Links
New Product
Switch Mode Power Supply
S8JC-Z (15/35/50/100/150/350-W Models)
Economical Power Supply
• Mount to DIN Rails for models with ratings of 15 to
350 W
• Protection against overcurrents and overvoltages.
Note: Refer to Safety Precautions on page 7.
Model Number Structure
Model Number Legend
Note: Not all combinations are possible. Refer to List of Models in Ordering Information on page 1.
S8JC-Z@@@@@@@
1
2
3 4
1. Power Ratings
015: 15 W
035: 35 W
050: 50 W
100: 100 W
150: 150 W
350: 350 W
2. Output Voltage
05: 5 V
12: 12 V
24: 24 V
Ordering Information
List of Models
Note: For details on normal stock models, contact your nearest OMRON representative.
Configuration
Bottom-mounting
Covered Power
Supplies
DIN Rail-mounting
Input voltage
Power ratings
15 W
35 W
50 W
100 W
150 W
350 W
200 to 240 VAC
15 W
35 W
50 W
100 W
150 W
350 W
3. Configuration (15/35/50/100/150 W model)
C: Covered
4. Configuration/mounting
None: Bottom-mounting
D: DIN Rail-mounting
Output voltage (VDC)
Output current
5 V
12 V
24 V
5 V
12 V
24 V
24 V
24 V
24 V
24 V
14.6 A
5 V
12 V
24 V
5 V
12 V
24 V
24 V
24 V
24 V
24 V
14.6 A
Model
3.0 A
S8JC-Z01505C
1.3 A
S8JC-Z01512C
0.7 A
S8JC-Z01524C
7.0 A
S8JC-Z03505C
3.0 A
S8JC-Z03512C
1.5 A
S8JC-Z03524C
2.1 A
S8JC-Z05024C
4.5 A
S8JC-Z10024C
6.5 A
S8JC-Z15024C
S8JC-Z35024C
3.0 A
S8JC-Z01505CD
1.3 A
S8JC-Z01512CD
0.7 A
S8JC-Z01524CD
7.0 A
S8JC-Z03505CD
3.0 A
S8JC-Z03512CD
1.5 A
S8JC-Z03524CD
2.1 A
S8JC-Z05024CD
4.5 A
S8JC-Z10024CD
6.5 A
S8JC-Z15024CD
S8JC-Z35024CD
1
Advertisement
Table of Contents
Related Manuals for Omron S8JC-Z
Summary of Contents for Omron S8JC-Z
-
Page 1: Ordering Information
Note: Refer to Safety Precautions on page 7. Model Number Structure Model Number Legend Note: Not all combinations are possible. Refer to List of Models in Ordering Information on page 1. S8JC-Z@@@@@@@ 1. Power Ratings 3. Configuration (15/35/50/100/150 W model) - Page 2 620 g 920 g Note: 1. Unless otherwise specified, all parameters are measured with a 230-VAC input, at the rated load, and at an ambient temperature of 25°C. 2. Ripple and noise are measured at a bandwidth of 20 MHz.
-
Page 3: Engineering Data
-20 -10 Ambient Temperature (°C) Note: 1. Internal parts may occasionally deteriorate or be damaged. Do not use the Power Supply in areas outside the derating curve (i.e., the area shown by shading A in the above graph). 2. If there is a derating problem, use forced air-cooling. - Page 4 75±1 (Depth 2 mm max.) Note: The screws must not protrude more than 2 mm inside the Power Supply when screw holes provided on the chassis are used. If the dimensions are not correct, the Power Supply may be damaged.
- Page 5 S8JC-Z15024C (150 W) Four, M3 screws Seven, M3 screws 4 dia. 50±1 120±0.5 159±1 4 dia. 149.5±0.5 Three, M3 125±0.5 (Depth 2 mm max.) Panel mounting holes dimensions Surface screw mounting Two, M3 Side Mounting ±0.5 Bottom Three, M3 Mounting 149.5 ±0.5...
- Page 6 S8JC-Z DIN Rail-mounting Models S8JC-Z015@@CD (15 W) (10) 79.5 (15.6) 9.5 mm max. S8JC-Z035@@CD (35 W) S8JC-Z05024CD (50 W) (10) 9.5 mm max. S8JC-Z10024CD (100 W) (10) (16.1) 9.5 mm max.
-
Page 7: Safety Precautions
The service life varies, however, depending on the ambient temperature or other surrounding environmental conditions such as dust. As a guide two years if it is used at an ambient temperature of 40°C. (For 350-W Models only.) • The screws must not protrude more than 2 mm inside the Power Supply when screw holes provided on the chassis are used. - Page 8 PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.
Need help?
Do you have a question about the S8JC-Z and is the answer not in the manual?
Questions and answers