Confirmation Of Firmware Version - Panasonic LUMIX DMC-FZ10PP Service Manual

11 CONFIRMATION OF FIRMWARE VERSION

TOP PREVIOUS NEXT
The Firmware version can be confirmed by ordering the following steps:.
Step 1. Turn the Power on:
Turn the Power on with inserting the SD memory card which has a few photo data.
Step 2. Confirm the version:
Set the mode dial to " [Playback] ".
Press [Burst] and " [DOWN] of Cross key" simultaneously. (No need to keep pressing.)
(The version information is displayed on the LCD with red colour letters.)
<Point>
The firmware version and EEPROM version can be confirmed with the information (1).
The information (2)-(4) are just reference.
<NOTE>
The Sub-uCOM version (stored in IC7201: Masked type) is not rewrite-able.
Necessary data of IC7202 (EEPROM) is updated automatically, when the stored data in IC6004
(Flash ROM) is changed.
TOP PREVIOUS NEXT