Advertisement
Quick Links
Enroll a 2GIG Doorbell (2GIG-DBELL1-345)
The 2GIG-DBELL1-345 is a wireless RF doorbell that enrolls to the 2GIG GoControl like a sensor, and can be used for
triggering notifications and video recordings for existing video cameras. There is no additional Service Package add-on
required for the customer to enroll the 2GIG doorbell.
This wireless doorbell sounds one of 11 selectable chimes when the pushbutton is pressed. The DBELL1 wireless
doorbell has a range of up to 350 feet and can be powered using battery or low voltage wiring.
Note: The 2GIG Smart Video Doorbell Camera is not compatible with Alarm.com.
For the full 2GIG-DBELL-345 installation guide, see 2GIG's
To program the 2GIG doorbell using the 2GIG GoControl:
Note: To scroll between options, tap the ← or → arrows. To move to the previous or next prompts, tap the ↑ or ↓ arrows.
1. Tap Security.
2. Tap Menu.
3. Tap Toolbox.
4. Enter the installer code.
5. Tap → to Toolbox (3 of 3).
6. Tap Installer Toolbox.
7. Tap System Configuration.
8. Select RF sensor # (01 to 48) to assign the doorbell to an empty sensor number.
9. Select RF sensor type. The recommended group is (23) no response type, this allows the system to chime when
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Panels/2GIG_GoControl/Enroll_a_2GIG_Doorbell_...
Doorbell Installation
Instructions.
Updated: Thu, 13 May 2021 19:00:41 GMT
1
Advertisement
Related Manuals for Alarm.Com 2GIG-DBELL1-345
Summary of Contents for Alarm.Com 2GIG-DBELL1-345
- Page 1 Enroll a 2GIG Doorbell (2GIG-DBELL1-345) The 2GIG-DBELL1-345 is a wireless RF doorbell that enrolls to the 2GIG GoControl like a sensor, and can be used for triggering notifications and video recordings for existing video cameras. There is no additional Service Package add-on required for the customer to enroll the 2GIG doorbell.
- Page 2 Test the 2GIG doorbell Before mounting the sensor, verify that the sensor mounting location provides good RF communication to the panel. https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Panels/2GIG_GoControl/Enroll_a_2GIG_Doorbell_… Updated: Thu, 13 May 2021 19:00:41 GMT...
-
Page 3: Notification Setup
Enable or disable Sensor Activity Monitoring. • The doorbell must be programmed in the panel as an RF sensor. The sensor group Alarm.com generally recommends is 23-No Response Type, which allows for notifications when the doorbell is activated. Notification setup To set up a 2GIG doorbell button push to send a notification, create a Sensor Activity notification. -
Page 4: Specifications
• 11 selectable chimes • Doorbell can illuminate Z-Wave lights when engaged • Compatible with Scenes or Rules • Receive text/email from Alarm.com when doorbell engaged • Battery or low voltage for power • Low battery indicator • Battery included •... - Page 5 Operating temperature limits 14° to 104° F (10° to 40° C) Relative humidity 595% Non-Condensing Battery (installed with pull tab) One Panasonic CR2032 or equivalent Lithium batteries Included accessories Four Phillips flat-head screws https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Panels/2GIG_GoControl/Enroll_a_2GIG_Doorbell_… Updated: Thu, 13 May 2021 19:00:41 GMT...
Need help?
Do you have a question about the 2GIG-DBELL1-345 and is the answer not in the manual?
Questions and answers