Omron CP1L Operation Manual page 690

Auxiliary Area Allocations by Address
Addresses Name
Word Bits
A598 A598.00 FPD Teach-
ing Bit
A600 to All Macro Area
A603 Input Words
A604 to All Macro Area
A607 Output
Words
A619 A619.01 Serial Port 1
Settings
Changing
Flag (CP1L
M-type CPU
Units)
A619.02 Serial Port 2
Settings
Changing
Flag (CP1L
M-type CPU
Units)
Serial Port 1
Settings
Changing
Flag (CP1L
L-type CPU
Units)
656
Function
Turn this bit ON to set the monitoring
time automatically with the teaching
function.
While A598.00 is ON, FPD(269)
measures how long it takes for the
diagnostic output to go ON after the
execution condition goes ON. If the
measured time exceeds the monitor-
ing time, the measured time is multi-
plied by 1.5 and that value is stored
as the new monitoring time.
(The teaching function can be used
only when a word address has been
specified for the monitoring time
operand.)
Before the subroutine specified in
MCRO(099) is executed, the source
words for the subroutine are trans-
ferred to A600 through A603 (input
parameter words).
After the subroutine specified in
MCRO(099) has been executed, the
results of the subroutine are trans-
ferred from A604 through A607 to
the specified destination words (out-
put parameter words).
ON while the serial port 1's commu-
nications settings are being changed
for a CP1L M-type CPU Unit. This
flag will be turned ON when
STUP(237) is executed and it will be
turned OFF after the settings have
been changed.
ON while the serial port 2's commu-
nications settings are being changed
for a CP1L M-type CPU Unit. This
flag will be turned ON when
STUP(237) is executed and it will be
turned OFF after the settings have
been changed.
ON while the serial port 1's commu-
nications settings are being changed
for a CP1L L-type CPU Unit. This
flag will be turned ON when
STUP(237) is executed and it will be
turned OFF after the settings have
been changed.
Settings Status
after
mode
change
ON: Teach Cleared
monitoring time
OFF: Teaching
function OFF
Input data: Cleared
4 words
Output data: Cleared
4 words
ON: Changing Retained Cleared
OFF: Not
changing
ON: Changing Retained Cleared
OFF: Not
changing
Appendix D
Status at Write Related
startup timing Flags,
Settings
Cleared --- ---
Cleared --- ---
Cleared --- ---
--- ---
--- ---