Software - Avermedia D133 Series Manual

2. Using the commands below in the Linux PC to start re-flashing BSP.
$ sudo tar zxvf D133ON-R2.*.*.tar.gz
(file: D133ON-R2.*.*.tar.gz for D133ONB)
$ cd JetPack_*.**/Linux_for_Tegra
$ sudo ./setup.sh
$ sudo ./install.sh
The BSP is support flash to default nvme ssd or external USB dungle.
You can select whitch one you want to flash after launching the install script.
Note: sudo is required to re-flash the BSP..

5.0 Software

This section describes BSP's features for D133ONB
Support optional M.2 WI-FI/Bluetooth modules (Intel® Wireless-AC 9260), the
1.
manager UI of AC9260 WiFi/Bluetooth is located on the upper-right corner of Ubuntu
desktop. It can be also controlled by nmcli/hcitool in command line.
Support SD slot (D133ON is not support SD card slot.)
2.
Power Mode
3.
Power mode can be modified by the UI on the upper-right corner of Ubuntu or the
following commands.
# get current power mode
$ sudo nvpmodel -q
# setup power mode
# where <x> is power mode number, please refer to
https://docs.nvidia.com/jetson/archives/r35.2.1/DeveloperGuide/index.html#page/T
egra%20Linux%20Driver%20Package%20Development%20Guide/clock_power_s
etup.html# for more information
$ sudo nvpmodel -m <x>
* Current default power mode:
D133ON: MODE 15W DESKTOP (2)
RTC Battery
4.
The following command can get RTC battery voltage.
$ sudo avt_tool -a | grep -oP "AIN5.*\[\K[^\]]*"
D131 User Manual AVerMedia Technologies, Inc www.avermedia.com
29