Error Codes - METERBOOST MB48LI82.GW Manual

ERROR CODES

• E01: There is a problem with the BMS, MeterBoost should be contacted.
• E02: The battery is ON, but the system is not detecting voltage on the out-
put terminals. Probably the internal fuse is blown, and the battery must be
sent to MeterBoost to be serviced.
• E03: Mismatch between the battery PCB and BMS.
• E04: The user tried to turn ON a battery that is not paired to a MtB GateWay
and the battery detected voltage in its output. The battery should first be
paired with a MtB GateWay and then turned on.
• E05: Battery PCB lost communication with the BMS.
• E06: The battery could not verify or change the BMS status. The battery
output state is undefined, there could be voltage at the battery output
terminals.
Núcleo Empresarial da Venda do Pinheiro II - Letra D e E, 2665-608 Mafra, Portugal
Web: www.meterboost.com
B A T T E R Y
MeterBoost, Lda.
E-Mail: info@meterboost.com
F O R L I F E
Phone: (+351) 261 060 001