Connecting To A Smart Device Via Bluetooth (Optional) - Masimo MightySat Medical User Manual

MightySat ® Medical

Connecting to a Smart Device via Bluetooth (Optional)

Note: Bluetooth LE is a feature available for use with compatible smart devices. For a full list of compatible smart devices, see www.masimo.com.
Bluetooth Connection
The MightySat provides a Bluetooth LE connection to a smart device. The Bluetooth connection is only available with the Masimo App. Bluetooth icon will appear when
connected. MightySat connects to a single device at a time to reduce risk of unauthorized access.
Note: The MightySat requires the use of the Masimo App to connect to a smart device.
Pair MightySat to Smart Device
1. Ensure the Bluetooth is enabled on the smart device through the device settings.
2. From your compatible smart device, perform one of the following:
 For Android
-powered devices, go to the Google Play
TM
 For Apple
devices, go to the App Store
®
3. Search and download the "Masimo" app.
4. Launch the Masimo App.
5. Turn the MightySat Bluetooth On. See Main Menu Options on page 13 of this manual for further instructions.
6. Follow the Masimo App on-screen instructions to pair a device.
7. When the Masimo App identifies the MightySat, press/select it to pair.
8. Once MightySat is connected to a smart device, the Masimo App returns to the Main screen.
Note: A connection icon will appear on the MightySat device when a Bluetooth connection has been established.
9. Place MightySat on the patient's finger. Confirm that readings on MightySat and readings displayed on the Masimo App are the same without a delay greater
than 10 seconds.
Note: If the delay is greater than 10 seconds, move the MightySat closer to the smart device and repeat the connection process.
Note: Turn off the Bluetooth on the MightySat to prevent unauthorized connections when not used.
CAUTION: When using Bluetooth, keep both devices within range of each other. See Specifications for details. Moving out of range may cause a loss in
connection with the smart device.
CAUTION: When using Bluetooth, move the devices away from sources that may interfere with the connection. Interference may result in loss of Quality of
Service. See Specifications on page 15 for details.
Verify Paired MightySat
1. On the smart device, access the Masimo Personal Health app Options.
2. Locate Paired Device.
Note: Sensor Mode is always Bluetooth Sensor when using MightySat with a smart device.
3. Compare the Paired Device information to the BT SN (Bluetooth Serial Number) displayed on the MightySat About screen, see Main Menu Options on page 13
for information on accessing the About screen.
Disconnect Paired MightySat
1. On the smart device, access the Masimo Personal Health app Options.
2. Press/select the Paired Device information.
3. Select Forget this Device. MightySat will be disconnected from the smart device. MightySat will need to be paired if it is to be used with this smart device again.
Masimo Corporation
store.
TM
.
SM
14
Advanced Setup and Use
www.masimo.com