Related Manuals for Kalfire E Series
Summary of Contents for Kalfire E Series
- Page 1 INSTALLATION AND OPERATION MANUAL Kalfire electric fireplace E-series Kalfire E-55” Kalfire E-65” February 2024 Please read these instructions thoroughly before installing or using the fireplace.
- Page 3 IMPORTANT Please read these instructions carefully before installation. Failure to follow them could result in serious injury. For use with 230~240V – 50Hz – 11Amp electric supply. This appliance must be grounded. The heater outlet becomes hot while in operation. Never cover the heater outlet or any other part of the appliance.
-
Page 5: Table Of Contents
Installing the fireplace with Media Wall12 Installing the fireplace with Design Frame Custom built-in requirements 5 E-SERIES OPERATION Main On/Off Switch Remote Control Pairing Remote and Symbols Kalfire Connected App 6 MAINTENANCE Cleaning The Fireplace Replacing batteries 7 TROUBLE SHOOTING 8 TECHNICAL DATA Specifications... -
Page 6: Introduction
INTRODUCTION packaging for any signs of damage during transport. Kalfire stands for innovation and quality. This is why we Physically inspect the items for damage or work continuously on the further development of our products. We reserve the right to make changes to the irregularities. -
Page 7: General Safety Regulations
weight overview, check the table in paragraph 8.3. pertaining to the maintenance of the fireplace Kalfire is not responsible for damage or injuries without parental supervision. because of the use of improper materials or If the power cable becomes damaged, it must be ... -
Page 8: Disposal
Netherlands. We stand behind the quality of our products, and that's why we offer a two-year warranty period on the Kalfire E-series, starting from the invoice date. To prevent a possible fire, do not block air intakes ... -
Page 9: Product Overview
PRODUCT OVERVIEW Packaging Unpack and separate components of the fireplace according to the separately provided unpacking instructions which can be found on the top of the product after removing the cardboard lid of the packaging. It is always recommended to place the content of the box onto carpet or cardboard to prevent damage to any floors or the fireplace. -
Page 10: Installing The Fireplace
If the chosen surface is a floor, ensure the floor consists of non-combustible materials. Kalfire is not responsible for damage or injuries 4.2.1 Anchoring the fireplace to the wall because of the use of improper materials or installation. - Page 11 template out with the surface on which the product is placed and hang on the wall using tape. WARNING! provided wall anchoring brackets are not suitable for wall mounting the fireplace, only for anchoring the fireplace and providing additional safety against tipping.
-
Page 12: Installing The Fireplace With Media Wall12
If the chosen surface is a floor, ensure the floor Lift the fireplace over the wall anchors. The consists of non-combustible materials. product is now fixed in place. Kalfire is not responsible for damage or injuries because of the use of improper materials or IMPORTANT! installation. - Page 13 connect the fireplace in this manner to the internet. A LAN cable is not included. IMPORTANT! Note that the Design Bottom with Log set has to be removed to start installation. 4.3.1 Anchoring the fireplace to the wall Use the provided drilling template to mark out the holes for the wall anchors.
- Page 14 Use 4x DIN 571 6 X 60 hexagon head wood screw to 4.3.2 Installing the Media Wall mount Brackets to wall. Use the provided drilling template to mark out the position of the Media Wall. First place the sides of the drilling template and align them with the sides of the already installed product.
-
Page 15: Installing The Fireplace With Design Frame
While assembling the fireplace, place the fireplace on a piece of cardboard or rug to protect the floor from damage from withal parts. Due to the weight of the fireplace, it is highly recommended to place and lift the unit with two people. - Page 16 (Optional) If a hidden wall socket is desired, the following space in the Design Frame can be used for this purpose. Use 4x DIN 571 6 X 60 hexagon head wood screw to mount the brackets to the wall. Once marked, install the wall anchors by referring to the standard installation conditions for each wall type.
- Page 17 Mount the supplied clamps with the supplied PAY ATTENTION! screws to the bottom of the Design frame at the It is recommended to place the power cable on the marked points. Tighten them with a screwdriver. bottom shelf of the Design Frame to ensure that power can be connected to complete the installation.
-
Page 18: Custom Built-In Requirements
shelf of the design frame to make sure power can The product is now ready for use. Continue with chapter 5 to start operating the product. be accessed to complete installation. The product is now in place. Custom built-in requirements IMPORTANT! Place the fireplace on a piece of cardboard or a ... - Page 19 Kalfire is not responsible for damage or injuries resulting from the use of unsuitable materials or installation.
-
Page 20: Series Operation
Flame selection up on the screen to ensure the remote control has not been paired yet. Kalfire sound - volume down Pairing the remote control: Press button 4 and 5 on the remote control at same Dynamic light nr. 1 and nr. 9 time. -
Page 21: Kalfire Connected App
6./7./15 Moods 5.4.1 Installing the Kalfire Connected App Before installing the Kalfire Connected app, please check: Power on/off If you are on the same Wi-Fi network as the fireplace (The app should be connected to the fireplace via a 2.4GHz Wi-Fi network). -
Page 22: Maintenance
aggressive cleaning agents. The use of sandpaper, MAINTENANCE steel wool or brushes and scouring pads is strictly not recommended. This will leave scratches on the diffuser WARNING! and the aluminum profile. Before cleaning, make sure the power has been turned off at the circuit breaker panel and that the heating element of the heater is cool. -
Page 23: Trouble Shooting
TROUBLE SHOOTING In the event of a malfunction, first check the points below. If the problem persists, please contact your supplier. The fireplace does not start. Check if the main switch on the top right of the device is turned on. (see section 5.1). Also, see the troubleshooting tree in section 8.5 ... -
Page 24: Technical Data
TECHNICAL DATA Product Weight (kg) Weight (lbs) Specifications Kalfire E-55” 74,5 Kalfire E-series Kalfire E-55” with Model: E55 / E65 Media Wall Input: 230~240V – 50Hz – 11Amp Kalfire E-55” with Power: 1,600 Watt 55,5 Design Frame Energy consumption per operating mode Kalfire E-65”... -
Page 25: Wire Diagram
Wire Diagram... -
Page 26: Troubleshooting Tree
troubleshooting tree... -
Page 28: Dimensional Drawings
Dimensional drawings... - Page 32 Kalfire B.V. Geloërveldweg 21 5951DH Belfeld www.kalfire.com...
Need help?
Do you have a question about the E Series and is the answer not in the manual?
Questions and answers