Sansui AU-719 Operating Instructions Manual page 30

30
Tape Play
Playback of tapes
hee
2.
Be sure to turn the VOLUME control fully counterclockwise before
operating any of the switches on the unit. ;
Push the TAPE PLAY "TAPE-1" or ''TAPE-2" switch, whiché 1s
applicable for the tape deck you wish to use.
3. Operate the tape deck to start playback.
iL
. Adjust volume, balance and tone to your liking with controls and
switches on your unit.
Suggestions for high-quality tape playback
*
Dirty heads in the tape deck deteriorate tonal quality and cause
dropouts. Dirty capstans and pinch rollers increase wow and flutter.
When a tape deck is used for a certain duration, heads can be
magnetized and add, on playback, noise, bringing forth tonal degra-
dation. Be sure to de-magnetize the heads from time to time on
regular basis.
Heads may be magnetized and information on tapes may be erased
when subjected to magnets. Please take note.