Sennheiser E 825 S Product Sheet

e 825-S
e 825-S General Purpose Microphone
The e 825 S is a cardioid general purpose microphone ideal for vocal and instrument miking
and club PA. Sound inlet basket: refined steel.
Features—Benefits
• Metal construction—rugged and reliable
• Shock-mounted capsule—low sensitivity to impact and handling noise
• Hum compensating coil—reduces electrical interference
• Balanced frequency response
• Neodynum ferrous magnet with boron—keeps mic stable regardless of climate
• Falcon ring—consistent sound over time
• Silent on/off switch
• On/off switch (reed switch) can be locked in the 'on' position if required

Technical Data

Pick-up pattern
Frequency response
Sensitivity(free field, no load) (1 kHz)
Nominal impedance
Min. terminating impedance
Dimensions in inches
Weight

Product Variants

e 825-S, EPACK825S (E 825-S, Stand, Cable), THREEPACK 825S (3x825-S)

Supplied Accessories

1 Protective pouch
1 MZQ 800 Microphone clip

Optional Accessories

21' XLR microphone cable
Grey foam windscreen
Floor stand with boom arm
Architect's Specifications
The unit shall be a cardioid vocal and instrument microphone. It shall operate with a frequency
response of 80 Hz–15 kHz.The sensitivity (free field, no load) shall be 1.5 mV/Pa at 1 kHz, with
a nominal impedance of 350 Ω.The min. terminating impedance shall be 1 k. The unit shall be
1.89 x 7.08 inches, and weight 11.64 oz. The unit shall be a Sennheiser e825 microphone.
cardioid
80–15,000 Hz
1.5 mV/Pa at 1 kHz, nominal
350 Ω
1 k
1.89 x 7.08
11.64 oz
MC21N
MZW 4032
SEMS 3000
e 825-S