Checking The Delivery; Storage - HAWE Hydraulik HS 120 Assembly Instructions Manual

4.3 Checking the delivery

Unpacking

4.4 Storage

14/38
1. Remove product.
2. Check product for transport damage and completeness.
Note transport damage on the transport documents or on the carrier's delivery bill.
Document transport damage with photos and report to the manufacturer.
3. Properly dispose of the product packaging in accordance with local regulations.
NOTICE
For any defect found, le a complaint immediately with:
HAWE Hydraulik SE
Einsteinring 17
85609 Aschheim near Munich, Germany
Tel.: +49 89 379100-1491
service@hawe.de
Claims for damages can only be addressed within the applicable complaint periods. HAWE does not
accept any liability for subsequent complaints.
NOTICE
Property damage from incorrect storage
Incorrect storage can lead to damage. Refer to the technical data.
Store the product and its separate components as follows:
Do not store outdoors.
■
Store dry and free of dust.
■
Protect the equipment against sunlight (UV radiation).
■
optimum storage temperature: 15 - 20 °C
■
Do not store close to ignition and heat sources, aggressive media (e.g. acids, fuel, lubricants), and
■
ozone-emitting illuminants (e.g. fluorescent light sources, mercury vapor lamps).
Protect the valves and valve controllers against gumming of the hydraulic uid if stored more than 2
■
years. To do so, contact the manufacturer of the hydraulic uid.
Avoid mechanical jolts.
■
B 6347 - 07-2022 - 1.0en HAWE Hydraulik SE