Transport & Positioning - Falcon DOMINATORPLUS E3917i Instructions Manual

8.1 TRANSPORT & POSITIONING
GENERAL WARNINGS FOR TRANSPORT:
8.1.1 Observe the Maximum load and stacking limits.
8.1.2 Follow the indications shown on the packaging, any instructions on the
equipment, including those on the points where forklift trucks cannot be used.
8.1.3 Danger of crushing during transportation due to the weight of the appliance.
8.1.4 Hands and fingers may be crushed.
8.1.5 Wear suitable protective clothing when transporting.
8.1.6 Danger of overturning during transporting.
8.1.7 Danger of crushing due to the appliance overturning on persons.
8.1.8 Take care over the centre of gravity of the appliance.
8.1.9 Take great care to ensure that the appliance does not overturn during
transportation, lifting and after installation.
Take care over the width and height of accesses during transportation.
Take care not to damage the appliance due to narrow doorways: doorways less than 80cm
wide, remove any handles etc.
Check that all the parts of the appliance are intact and have not been damaged during
transportation. If damaged due to transportation, inform the specialised reseller/ haulier
immediately.
To position the appliance, it is recommended to use the mount offered by the manufacturer,
should you want to do things differently, it is necessary to take account of the weight of the
appliance.
Before permanently fixing the appliance in position, the Water, Electrical and Gas
Connections must be made. (See relative sections).
Once the appliance is installed, the electrical power cable must be protected, and never
stretched or tugged.
Remove all packaging materials and peel away the protective plastic film from all external
surfaces of the appliance.
UNLESS OTHERWISE STATED, PARTS WHICH HAVE BEEN
PROTECTED BY THE MANUFACTURER ARE NOT TO BE ADJUSTED
BY THE INSTALLER.
30