Related Manuals for Hansa ZWM 536 SH
Summary of Contents for Hansa ZWM 536 SH
- Page 1 ZWM 536 SH ZWM 536 WH OPERATING INSTRUCTIONS DISHWASHER Please carefully read these Operating Instructions before using the appliance!
-
Page 2: Table Of Contents
THANK YOU FOR PURCHASING AN HANSA APPLIANCE DEAR CUSTOMER, Carefully read the operating instructions before plugging dishwasher to a power outlet and using the appliance. Operating instruction include tips that will help you avoid the risk of injury and damage to the appliance. -
Page 3: Safety Instructions For Use
SAFETY INSTRUCTIONS FOR USE Before you install the • Do not use an exten- appliance sion cord to connect Check the appliance for the appliance to the transport damage. Never wall outlet. Extension install or use a damaged cords are not suffi- appliance. - Page 4 SAFETY INSTRUCTIONS FOR USE Child safety Daily maintenance • Do not allow children • Use the appliance for to play with the appli- household dishwash- ance. ing only. • Dishwashing deter- • Do not use solvents in gents can be caustic the appliance as there and irritate the eyes, is a risk of explosion.
- Page 5 SAFETY INSTRUCTIONS FOR USE Recommendations • Plastic dishes that are not resistant to high • To save energy and temperature, contain- water, rinse food resi- ers made of copper or due of the dishes be- tin; fore loading the dishes •...
-
Page 6: Care For The Environment
CARE FOR THE ENVIRONMENT RECYCLING At the end of its useful life, this product must Packaging and some not be disposed of with parts of the appliance normal municipal waste. are made of materials Instead, it should be tak- suitable for recycling. en to an electronic waste They are marked with the collection and recycling... -
Page 7: Install The Appliance
INSTALL THE APPLIANCE Placement of the product NOTE: Aquastop water supply is used in some dishwasher models. Dangerous volt- • When choosing the place of installation, age could occur with Aquastop. Do not cut make sure you will be able to easily load and the Aquastop water supply. - Page 8 INSTALL THE APPLIANCE Electrical connection at lower voltage the dishwashing efficiency will deteriorate and may damage the ap- Grounded plug must be connected to a grounded pliance. power outlet with a proper voltage. If there is no grounding, refer this to a qualified electrician. If The power cord may only be replaced by you operate the appliance without proper ground- authorized service or a qualified electri-...
-
Page 9: Features And Components
FEATURES AND COMPONENTS The features and components of the appliance (fig. 1): Special salt container Detergent dispenser Cutlery basket Filter assembly Rinse aid dispenser Spray arms Cup shelf Basket Inlet pipe connector Drain pipe connector... - Page 10 FEATURES AND COMPONENTS Control panel (fig. 2): 1. Power button: turns the power supply on/off. 2. Delay button: press this button to set the delay. 3. Rinse aid warning light: lights up when you need to add rinse aid. 4. Salt warning light: lights up when you need to add special salt. 5.
-
Page 11: Prepare The Appliance For Operation
PREPARE THE APPLIANCE FOR OPERATION Before first use (2) using the supplied funnel (2). Replace and close the lid. If the salt indicator on the control • Before using the appliance, verify panel lights up, refill the special salt dispenser. that the data given on the rating plate matches that of local power outlets. - Page 12 PREPARE THE APPLIANCE FOR OPERATION Fill the detergent dispenser the programme with a higher wash temperature. Press latch to open the detergent dispenser, as Generally, using multi-component detergents shown in figure. (1) The detergent dispenser suitable results are obtained only under certain features volume marking.
- Page 13 PREPARE THE APPLIANCE FOR OPERATION Stop using multi-component detergents • Add special salt and rinse aid to dispensers. • Set the water hardness to the highest level (6) and run an empty dishwasher. • Adjust the water hardness. • Adjust rinse aid setting. Add rinse aid to the dispenser and adjust set- ting Use rinse aid to prevent the formation of white...
- Page 14 PREPARE THE APPLIANCE FOR OPERATION Water hardness table German French Water degrees [dH] degrees [dF] Water hardness level indicator hardness °dH mmol/l H1: Rapid 6-11 1.0-2.0 H2: 90Min 12-17 2.1-3.0 H3: 90Min & Rapid 18-22 3.1-4.0 H4: Glass 23-34 4.1-6.1 H5: Glass &...
-
Page 15: Load Dishes Into Dishwasher
LOAD DISHES INTO DISHWASHER The standard load and test results Capacity: The upper and lower basket: 6 place settings. Set the upper basket to the upper position. Place the cups on the shelves. Detergent/rinse aid 3+18g, in accordance with the EN 50242, IEC 436 international standards/rinse aid dose: 6 Test programme Eco, in accordance with the EN 50242 international standard Cutlery basket... -
Page 16: Turn On The Appliance And Select Programme
TURN ON THE APPLIANCE AND SELECT PROGRAMME Turn on the appliance Start a wash cycle... Remove the basket (see the section entitled «Loading the Dishwasher”). Pour in the detergent (see the section entitled «Salt, Detergent and Rinse Aid» ). Insert the plug into the socket. The power supply is 220-240 VAC 50 Hz, the specification of the socket is 10 A, 250 VAC. - Page 17 TURN ON THE APPLIANCE AND SELECT PROGRAMME Change programme You can modify the washing programme, if the dishwasher operated for only a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water.
-
Page 18: Table Of Programmes
TABLE OF PROGRAMMES Table*: ** Standard programme This is a reference program for research institutes. Tests according to EN 50242. This programme is suitable for washing normally soiled tableware. This is the most effective pro- gramme taking into account the total energy and water consumption for this kind of tableware. Programme duration, energy and water consumption value given in the table have been determined under laboratory conditions. -
Page 19: Cleaning And Maintenance
CLEANING AND MAINTENANCE Regular dishwasher cleaning can extend its life- Improper fitting time of trouble-free operation. of the filter may reduce the appliance Grease and limescale can accumulate in dish- performance and washer chamber. In the event of such accumula- damage dishes and tion utensils. -
Page 20: Error Codes And Troubleshooting
ERROR CODES AND TROUBLESHOOTING Programme indicators: a) all indicators off — standby b) one programme indicator lights steady — programme paused pause or waiting to start the programme c) one indicator flashing — programme in progress, the appliance operates d) an indicator is flashing fast — error (see the following table) DESCRIPTION OF THE ERROR CODE ACTION... -
Page 21: Practical Advice And Useful Information
PRACTICAL ADVICE AND USEFUL INFORMATION high water hardness. dispenser. • Water softening system is at very low setting. • The appliance is improperly grounded. • The special salt dispenser lid is not closed properly. If the problem could not be corrected or, in the case of a defect not described above, please If the dishes won't dry contact our service centre. -
Page 22: Product Fiche
Product fiche in accordance with the Commission Delegated Regulation(EU) No 1059/2010 and in ac- cordance with Commission Regulation (EU) No 1016/2010. Supplier’s name or trade mark Hansa ZWM 536 SH / Type ZWM 536 WH Rated capacity Energy efficiency class... - Page 24 IO-DWS-0920 (05.2017)
Need help?
Do you have a question about the ZWM 536 SH and is the answer not in the manual?
Questions and answers