Page 4
• Lock Position : To transport and store your iron. M. Table grip To fix the base of your iron to your table. N. Cord winder To avoid contact between the cord and the soleplate of the iron. O. Clip To attach the cord.
Page 5
• Unwind the cord completely. • Set the selector to Cordless and remove the iron from its base. • Turn the base over, pull out the table grip and fix it to the table at the rear. 2. Fill the tank.
Page 6
• When the iron's temperature is no longer sufficient to produce steam, the water supply is automatically cut off so that the soleplate does not "drip". • When you first use it, you must wait for 2 minutes before steam becomes available.
Page 7
Information: • The auto-cleaning function reduces the amount of scale in the iron. • Set your iron to "Cordless" and fill the tank up to the MAX indicator with tap water. • Set the thermostat control to MAX and the steam control to DRY.
Page 8
• Connect the brown wire to the terminal in the plug marked ”L” or coloured red or brown. • Connect the blue wire to the terminal in the plug marked ”N” or coloured black or blue.
Need help?
Do you have a question about the ULTRAGLIDE CORDLESS 1690 and is the answer not in the manual?
Questions and answers