Linsar AF2-40D06 Operating Manual page 79

Safety instructions
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including the following safety notices. Read all instructions.
WARNING!
Faulty electric installation or excess mains voltage can cause an
electric shock.
- Only connect the product to a properly installed socket. The
mains voltage must match the value indicated on the rating
plate.
- Only connect the power cable to an easily accessible socket so
that you can quickly disconnect it from the mains power in the
event of a malfunction.
- Do not connect the product if the product, power cable or a
mains plug shows visible signs of damage.
- If the power cable of the product is damaged, it must be
replaced by the manufacturer, the manufacturer's customer
service or a similarly qualified person in order to prevent
hazards.
- Do not open the product; have repairs performed by qualified
experts. Contact the service address indicated on the warranty
card. No liability is assumed and warranty claims shall be
excluded in the case of unauthorised repairs, improper
connection or incorrect operation.
- When repairing, only use parts that correspond to the original
product data. There are electrical and mechanical parts in this
product to protect you from danger sources.
Risk of electric shock!
79