Venta Original, LW15, LW25, LW45 - Air Humidifier Manual

Also See for Original:

Instructions for use manual (38 pages)

Table of Contents

Contents

1 Introduction
2 SCOPE OF DELIVERY
3 SYMBOLS
4 INTENDED USE
5 IMPROPER USE
6 OVERVIEW
7 BEFORE THE FIRST USE
8 PUTTING INTO OPERATION
9 CONTROL PANEL
10 AUTOMATIC SWITCH OFF
11 MAINTENANCE AND CLEANING
12 CLEANING THE UPPER HOUSING OF THE APPLIANCE
13 TECHNICAL DATA
14 ACCESSORIES & SERVICE
15 WHAT TO DO IF...
- 15.1 the appliance won't switch on?
16 SAFETY INSTRUCTIONS
17 SERVICE AND SUPPORT
18 Documents / Resources
- 18.1 References
- 18.2 Download manual

Venta Original, LW15, LW25, LW45 - Air Humidifier Manual

Introduction

We are confident that this Venta model will exceed your expectations and hope that you enjoy it.
Please register your Venta appliance here: www.venta-air.com
Please read these operating instructions in its entirety, keep it for future reference and observe all safety instructions for the proper use of the appliance. You can find the current version of the operating instructions on our website www.venta-air.com
The Venta Original Air Humidifier creates healthy humidity and naturally reduces harmful substances in the air. It is incredibly simple to use and requires no complex technical knowledge. Simply fill with water – no need for humidifier mats or filters. The humidifier uses the proven cold evaporation principle.

Here's how the Venta principle works
A fan directs the ambient air into the water-filled humidifier, where it flows through specially arrayed disk stacks. Hygienically clean air evaporates from their surfaces into the room.

SCOPE OF DELIVERY

1 x Venta appliance
1 × bottle of hygiene additive 50 ml
1 x quick-start guide
1 x safety instruction sheet
If any parts are missing or damaged, please contact our service partner or your local retailer.

SYMBOLS

warning Please read and follow the Safety Instructions carefully to prevent injuries or damage to property.
Additional information
Helpful tips

INTENDED USE

This Venta appliance is a domestic appliance for humidifying the air in interior rooms.
The appliance is not suitable for outdoor areas. Any other use or modification of the appliance is considered to be improper use. Venta is not liable for damage or injuries resulting from improper use.

IMPROPER USE

Using the appliance for something other than the intended purpose can endanger health and lives. This includes use under the following conditions:

in rooms or locations where there is risk of explosion and/or where there is an aggressive atmosphere.
in rooms where there is a high concentration of solvents.
in the vicinity of swimming pools or other wet areas.
outdoors.

OVERVIEW

Control panel
Upper housing
Power supply unit (assembled)
Transport protection
Disk stack
Transport protection
Lower housing
Bottle of hygiene additive 50 ml

BEFORE THE FIRST USE

Unpack and set up the appliance. Remove the 50 ml bottle of hygiene additive 8 from the carton. Remove upper housing 2. Remove transport protection 4 from upper housing 2. Remove disk stack 5 from lower housing 7 and remove transport protection 6.

PUTTING INTO OPERATION

Fill lower housing 7 with tap water up to maximum WATERLINE marking and add 50 ml hygiene additive 8 (complete content of bottle).
Never fill the appliance before taking off the upper housing!
Adding the hygiene additive is very important, because this optimally humidifies the air.
Insert disk stack 5 into lower housing 7 and place upper housing 2 onto lower housing 7.
Plug in the power supply unit 3 to the mains and switch on the appliance by briefly pressing down the button on the control panel 1.

CONTROL PANEL

ON / OFF button
Operation display ON / OFF
Continuously lit: ON
Not lit: OFF
Fan setting display
1 - 2 (LW 15),
1 - 2 - 3 (LW 25/45)
4 Automatic switch-off display (see "Automatic switch off")
Fan setting selector button
1 - 2 (LW 15),
1 - 2 - 3 (LW 25/45)

AUTOMATIC SWITCH OFF

The appliance has an automatic switch-off feature that is indicated by the display 4 .

The appliance will shut off automatically if:	What can you do if
there is not enough water in the lower housing?	Switch off appliance, disconnect power supply unit, refill water and restart operation with button 1. See also „Maintenance and cleaning", „Daily"
the upper housing has been opened?	Close the upper housing correctly by pressing down on the outer ends of the locking latches. Switch appliance off and on again with the power button 1.
the upper housing is not placed atop or correctly fitted to the lower housing?	Place upper housing correctly on lower housing. Switch appliance off and on again with the power button 1.

MAINTENANCE AND CLEANING

Unplug the power supply unit from the power outlet for any cleaning and maintenance work!

DAILY
Switch off appliance with button 1, unplug power supply unit from the power outlet. Remove upper housing and fill fresh water into the lower housing. Replace upper housing on to lower housing. Switch on the appliance with button 1.

EVERY 10-14 DAYS
Switch off the appliance and unplug the power supply unit from the power outlet. Pour out dirty water. Brush scaling from the inside of the lower housing and rinse out. Rinse the disk stack with water. Refill the lower housing with fresh water. Add Venta hygiene additive. For dosage, refer to the table on the back of the bottle.
All residues in the lower housing and on the disk stack (white, green-yellowish or brownish deposits) do NOT impair the function of the appliance. Using the Venta hygiene additive guarantees problem-free, hygienic operation.

EVERY SIX MONTHS
For the six-monthly cleaning, we recommend the Venta Cleaner. Please note the instruction manual included with the Venta Cleaner.

CLEANING THE UPPER HOUSING OF THE APPLIANCE

warning Attention! Ensure the appliance is switched off during all actions and the power supply unit is disconnected from the power outlet!

Detach upper housing from lower housing. Press locking buttons so that the ends stand up.
Fold side parts out of the way.
Fold ribbed wings out of the way.
Unplug the power supply unit from the motor . Lift the motor upwards and out . Disconnect the power supply unit cable by releasing the bracket and pull downward and out through the opening of the upper housing .
- Do not disassemble the motor and the power supply unit, immerse them in water or bring them into contact with liquids!
- Only clean the motor with fan blades and gear with a dry cloth!
- The disassembled upper housing can be cleaned under running water!
- The disassembled upper housing must be absolutely dry before assembly!

Insert the motor into the upper housing from the correct side . Pull the power supply unit from the bottom upwards and through the opening of the upper housing and plug it into the motor until it clicks into place . Affix the cable with the bracket .
The outer ends of the locking buttons must be standing up. Fold the ribbed side wings and upwards, then the side elements and . Press down on the outer ends of the locking latches and to close the upper hous- ing correctly again.

TECHNICAL DATA

Model	LW 15	LW 25	LW 45
Colours	White-grey / anthracite-metallic
For room sizes*	up to 25 m²	up to 40 m²	up to 55 m²
Mains voltage	100- 240 V, 50/60 Hz
Power settings	2	3
Noise emission	22 / 32 dB (A)	24 / 34 / 44 dB (A)	24 / 35 / 45 dB (A)
Power consumption (settings 1–3)	3 / 4 watts	3 / 5 / 8 watts
Water content (max.)	5 litres	7 litres	10 litres
Dimensions (LxWxH)	26 × 28 × 31 cm	30 × 30 × 33 cm	45 × 30 × 33 cm
Weight	3 kg	3.8 kg	5.8 kg

* based on a ceiling height of max. 2.5 metres
May be subject to modifications and errors

ACCESSORIES & SERVICE

You can order accessories by phone or online at www.venta-air.com
You can find the contact details of our service partners on the back of these instructions.

WHAT TO DO IF...

warning Ensure the appliance is switched off during all actions and the power supply unit is disconnected from the power outlet!

the appliance won't switch on?

Please check whether the power supply unit is connected to the mains.

... the appliance won't switch on even though it is plugged in to the mains?
Please check whether the power supply unit is firmly plugged into the motor.
information Action: Remove upper housing. Check for correct positioning (see cleaning instructions for the upper housing). Then switch the appliance on again.

... the round blue operation display on the control panel is blinking?
The appliance has switched off automatically, because the motor is overstrained (e.g. through the intrusion of foreign objects or similar).
information Action: Remove upper housing. Check whether the disk stack in the lower housing as well as fan blades in the upper housing are freely movable. Then switch the appliance on again.

SAFETY INSTRUCTIONS

warning

This appliance is suitable for use by children over the age of 8 years and people with restricted physical, sensory, or mental capacities or lack of experience and knowledge, providing they are supervised or have received instructions on the safe use of the appliance and understand the existing hazards.
Read the operating instructions completely before putting the appliance into operation and keep them for later reference.
The appliance is not a toy for children.
Cleaning and user maintenance may not be performed by children under the age of 8 years or without supervision.
Keep the appliance and its power supply unit out of the reach of children under the age of 8 years.
Improper use can damage the appliance and cause physical injuries.
Plug the appliance into suitable power outlets only – the mains voltage must correspond to the nameplate data on the appliance.
This appliance can only be operated with the power supply units "Model No. BI13240050-Cd / FJSW1982400500".
Never use the appliance if it has a damaged power supply unit or cable, or after it has malfunctioned or if it has been dropped or damaged in any other way.
Unplug the power supply unit from the power outlet before every cleaning or maintenance operation or transportation of the appliance.
Never use the appliance if it has been dropped or damaged in any other way.
Electrical appliances should only be repaired by professional specialists. Amateur repairs could result in considerable danger to the user.
Do not sit on the appliance and do not place any objects on it.
Do not put any foreign objects into the appliance.
Do not immerse the upper housing in water or any other liquid.
Never overfill the appliance.
Never transport or tilt the appliance when the tank is full.
Never unplug the appliance by pulling on the cable or pulling the power supply unit out with wet hands.
The appliance should only be operated when it is completely assembled.
Place the appliance on a stable surface which is flat and dry.
Set up the device so that it cannot be knocked over, and so that no one can trip over it or its cable.
Ensure the appliance is at least 50 cm from any objects such as furniture or walls.
Maximum installation altitude: 2000 metres
Never cover or block the vents to prevent overheating/damage to the appliance.
A persistent relative ambient humidity of more than 60%, especially in winter, can enable the formation of biological organisms.
The design of the appliance and the cold evaporation technology make it impossible for water to leak directly from it in the form of droplets, vapour, mist or lime deposits, providing you use it correctly.
Only operate the appliance with original Venta accessories designed for the purpose. Venta Luftwäscher GmbH does not accept any liability for damage caused by the use of third-party accessories.
If you do not use the appliance for several days or put it into storage for a longer period, empty the water tray completely, clean it and dry thoroughly to prevent odours or biological organisms from developing in standing water or water residues.
Unplug the power supply unit from the power outlet when the appliance is not in use.
Ensure the area surrounding the appliance does not become damp or wet. If moisture leaks out, switch to a lower setting. If it is not possible to switch to a lower setting, use the appliance with interruptions. Make sure no absorbent material such as carpets, curtains, net curtains or tablecloths get damp.

SERVICE AND SUPPORT

GERMANY
Venta-Luftwäscher GmbH
Weltestraße 5
88250 Weingarten
Tel.: +49 751 50 08 0 Fax: +49 751 50 08 20 info@venta-air.com www.venta-air.com

AUSTRIA
Stromayer Elektro Service GmbH
Strohmayergasse 8
1060 Wien Österreich Tel.: +43 1 5961706 office@stromayer.at

CHILE
Venta Air Technologies, Inc.
US Headquarters
1111 North Plaza Drive Suite 715
Schaumburg, IL 60173
Tel.: +1-888-333-8218 Fax: +1-224-567-8349 info-us@venta-air.com www.venta-air.com/en_us

CZECH REPUBLIC
LetMeRepair GmbH
Fichtestrasse 1a 02625 Bautzen service-cz@venta-air.com www.letmerepair.com

FINLAND
Suomen Allergiakauppa
Länsiportintie 14
13430 HÄMEENLINNA
Finnland Tel.: +358400855000 myynti@allergiakauppa.fi www.allergiakauppa.fi

FRANCE
LetMeRepair GmbH
Fichtestrasse 1a 02625 Bautzen service-fr@venta-air.com www.letmerepair.com

SERVICE AND SUPPORT BENELUX
Venta Benelux B.V.
Van Heemstraweg Oost 8
5301 KE Zaltbommel
Niederlande Tel.: +31 4 18 54 13 43 info-nl@venta-air.com www.venta-air.com

HUNGARY
LetMeRepair GmbH
Fichtestrasse 1a 02625 Bautzen service-hu@venta-air.com www.letmerepair.com

ITALY
LetMeRepair GmbH
Fichtestrasse 1a 02625 Bautzen service-it@venta-air.com www.letmerepair.com

JAPAN
Address Service Co., Ltd.
17-9, Shinoda, Togane-shi,
Chiba, 283-0013 Japan Tel.: +81-120-407-554 venta_support@adservice. co.jp

LATVIA / LITHUANIA
SIA „BALTIJAS
TIRDZNIECĪBAS
UZŅĒMUMS"
Dārzaugļu iela 1-201,
Riga LV-1012, Latvia Tel.: +371 67790720 info@btu.lv

MALAYSIA / SINGAPORE / PHILLIPINES / VIETNAM
GA MAKMUR SDN BHD
No. 27, Jalan PP 11/4, Alam Perdana Industrial Park, Taman Putra Perdana, 47130 Puchong,
Selangor, Malaysia
Tel.: +603-8322 6628 Fax: +603-8322 6066 info@gasales.com.my SWITZERLAND
Venta-Luftwäscher AG
Bösch 65
6331 Hünenberg
Schweiz
Tel.: +41 41 781 15 15 Fax: +41 41 781 15 50 info-ch@venta-air.com www.venta-air.com

MONGOLIA
AERIS LLC
SUITE 316, Barilga Architecture Building, Chinggis Avenue, Oron Suuts Street, 2nd horoo, Khan-Uul district, Ulaanbaatar,
Mongolia 17032
Tel.: +976-99101185, +976-99096696 sales@aeris.mn www.aeris.mn

PORTUGAL
LetMeRepair GmbH
Fichtestrasse 1a 02625 Bautzen service-pt@venta-air.com www.letmerepair.com

RUSSIA
Venta Russia TSK IMPORT
(offizieller Importeur) 124683, Moskau, Selenograd, 1505, Raum III Russland
Tel.: +7 499 733 10 10 Fax: +7 499 733 10 10 venta@venta.ru

SCOTLAND, UK
LetMeRepair UK Ltd
1 Langlands Court
Kelvin South Business
Park, East Kilbride, G75
0YB, Scotland, UK Tel.: +44 (0) 1355 241 222 service-uk@venta-air.com Fax +44 1355 246575

USA
Venta Air Technologies, Inc.
US Headquarters
1111 North Plaza Drive Suite 715
Schaumburg, IL 60173
Tel.: +1-888-333-8218 Fax: +1-224-567-8349 info-us@venta-air.com www.venta-air.com/en_us

SLOVAKIA
LetMeRepair GmbH
Fichtestrasse 1a 02625 Bautzen service-sk@venta-air.com www.letmerepair.com

SPAIN
LetMeRepair GmbH
Fichtestrasse 1a 02625 Bautzen service-es@venta-air.com www.letmerepair.com

SOUTH AFRICA
EUROCARE Wellness
5 Star Business Park,
Unit 2, Persimmon Close, Honeydew, Johannesburg
Südafrika
Tel.: +27 11 888 3255 Fax: +27 11 888 9874 info@eurocarewellness. co.za

SOUTH KOREA
VENTA KOREA CO., LTD.
3/F., Seojin Bldg., 754,
Seolleung-ro, GangnamGu, Seoul 135-948, Korea
Tel.: +82 22 03 40 114
Fax: +82 22 03 40 119

UKRAINE
Venta-Centre Ukrein
Schlichtera, 11
Kharkov, Ukraine
Tel.: +38 057 752 72 72 Fax: +38 057 768 01 57 venta@venta.com.ua

www.venta-air.com/Service/Service-Support/

VENTA WORLD WIDE
www.venta-air.com/en_de/Venta-worldwide/