Advertisement
About the camera
System requirement
Users can ransfer videos and photos to computers with the following configurations:
Intel Pentium 2.0GHz or higher/ Microsoft Windows XP or higher operating system 2GB RAM
40GB above available disk memory/ Standard USB interface / 1GB GPU or higher 1920x1080
pixel or higher resolution.
Parts and controls
Front side view
Hot shoe
IR light
Lens
Top side view
Hot shoe
Photo shutter
Zoom in/out
Left side view
Built-in speaker
Built-in MIC
Back side view
Extenal
MIC Jack
HDMI output
interface
Type-C USB
interface
Bottom side view
Tripod hole
Mode button
Power / OK / IR light button / LED Light
UP
UP / Wi-Fi button
WiFi
DOWN
Down button
Menu button
Charge/Busy
indicator
Rec/Stop
button
Battery/memory
card slot cover
Advertisement
Need help?
Do you have a question about the DVR 8K-KIT v2 and is the answer not in the manual?
Questions and answers
Is there audio level or mic setting on this camera to adjust
Yes, the Vivitar DVR 8K-KIT v2 camera has "Tone settings" with options for High, Middle, Low, or Close, and an "Audio noise" setting that can be turned Open or Close. However, there is no mention of specific microphone gain or advanced audio level adjustments.
This answer is automatically generated
When I use the HDMI cord the output is 1080. Is there a way to change this to 720?
I shot some video of my son's lacrosse game, and I saw it in the video library. But when I connect the camcorder to my laptop, nothing comes up. On the camcorder itself, when I plug in the USB cord, I have the option of USB Drive, USB Camera, and USB Charging. I click on USB Drive, and my Windows photo app opens up, but no video appears. Do you have any ideas on how to get the videos off the camcorder and onto my computer?
To transfer videos from the Vivitar DVR 8K-KIT v2 camcorder to your computer:
1. Connect the camcorder’s Type-C USB port to the computer’s USB port using the supplied USB cable.
2. The camcorder will power on automatically and display available options on the screen.
3. Tap the desired option or use the UP/DOWN button and press the Power/OK/Light button to confirm.
Note: If the camcorder is in Playback mode when connecting the USB cable, it will only charge and not function as a PC camera or transfer files.
This answer is automatically generated