Product Specifications; Fall Clearance - SafeWaze Latitude HD SRL-P Manual

• Sharp Edges: Safewaze Class 1 SRLs are NOT designed for use in Leading
Edge Environments. Should a specific work area have an extremely sharp edge/
edges that may come into contact with the lifeline constituent of the SRL, a Class
2 SRL is required.
• Use only the applicable D-ring for intended use.
► ►

7.0 PRODUCT SPECIFICATIONS

• Latitude HD SRL-Ps are Class 1 SRLs.
• Minimum Breaking Strength: 3,600 lbs. (1632.9 kg)
• Working Temperature: -40⁰F (-40⁰C) to 130⁰F (54⁰C)
• Average Arrest Force: ≤ 1,350 lbs. (612.35 kg)
• Maximum Arrest Force: ≤ 1,800 lbs. (816.47 kg)
• Maximum Arrest Distance: 42 in. (106.68 cm)
Housing
Drum
Lifeline
Swivel
Fasteners
Locking Pawls
Main Shaft
Springs
► ►

8.0 FALL CLEARANCE

Always select a personal fall arrest system and anchor point location that limits free fall
and swing fall as much as possible. A free fall of more than 6 ft. could cause excessive
arrest forces that could result in serious injury or death.
• Free Fall: The distance a user falls before the fall arrester activates. The user must
determine the amount of Free Fall present in the system as this can increase or
reduce the Fall Clearance. Determine height of anchorage from the D-ring, lateral
offset from anchorage, anchorage setback from working edge, and the SRL model
number being used to select the appropriate clearance chart.
• Actual Arrest Distance (AD): Safewaze SRLs are tested in accordance with
ANSI Z359.14-2021 conditioning test protocols. Table 2 reflects the Actual Arrest
Distances of the Latitude HD SRL-P when subjected to Ambient, Wet, Hot, and Cold
testing. These Actual Arrest Distances are typically lower than the 42" maximum
as specified per ANSI. In certain instances this may allow for a Qualified Person to
adjust Minimum Required Fall Clearances.
TABLE 1: MATERIALS
3/16 in. Galvanized Steel or Stainless Steel Cable/UHMWPE Webbing
Aluminum/Steel/Stainless Steel
V3. 2023 Copyright Safewaze: 220-00081
Polymer or Aluminum
Aluminum
Aluminum or Steel
Brass
Stainless Steel
Stainless Steel
10