TP-Link Plug and Play TL-WPA7817 Quick Installation Manual

Quick Installation Guide
* TL-WPA7817 KIT (European version) is used for demonstration in this guide.
* Images may differ from actual products.
Plug and Play
e
r l i n
w e
P o
N
L A
N
W A
Router
1
Plug the adapter into a power outlet
and connect it to the router's LAN
Adapter
port via an Ethernet cable.
TL-PA7017
2
Plug the extender into a power outlet on the same service panel. Wait
until the extender's Powerline LED
Note: If the LED is off, please refer to FAQ > Q2.
3
On
Connect your devices to the internet using the default SSID (network
name) and password on the label of the extender.
Extender
TL-WPA7817
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
Tip:
Want to unify or personalize your network?
See the back page for instructions.
Attention
1. Use the product in any of the following directions.
Recommended
2. Plug powerline devices into wall outlets instead of power strips.
Note: Using power strip will affect network performance or even cause connection drops.
Wall Outlet
turns on.
Power Strip