Table of Contents
Advertisement
48
identifying the Parts
` Remote Commander,
The buttons that have the same name on the Remote Commander as on the camcorder function
identically.
Transmitter
[4] size AA (R6) battery holder
Point toward the remote sensor to control the
[5]
camcorder after turning on the POWER
START/STOP button
switch on the camcorder.
[6] Power zoom button
[2] Tape transport buttons
The zooming speed is unchangeable in the
Remote Commander.
[3] DISPLAY button
To Prepare the Remote Commander
To use the Remote Commander, you must insert two size AA (R6) batteries. Use the supplied size AA
(R6) batteries.
(1) Remove the battery cover from the Remote Commander.
(2) Insert both of the size AA (R6) batteries with correct polarity.
(3) Put the battery cover back onto the Remote Commander.
Note on battery life
The batteries for the Remote Commander last about 6 months under normal operation. When the
batteries become weak or dead, the Remote Commander does not work.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.
Advertisement
Table of Contents
