Table of Contents
Advertisement
Added/Included
The LED will be blinking
green
in Mode 1 for 30 min after every power cycle and 10 min after S
button pressed.
Settings in progress
Factory reset and reboot
During factory reset, the LED will turn solid
green
for approx. 1sec, then the
blue
and
red
LED
will be blinking 0,1s On / 0,1s Off for about 2sec.
Adding / Removing
During adding or removing, the LED will be blinking
blue
in Mode 2.
OTA firmware updating
During the OTA update, the LED will be blinking
blue
and
red
in Mode 2.
Checking power supply 230 V AC frequency or 24 V DC voltage
During checking the power supply, the LED will be blinking
blue
and
red
in Mode 5.
8.3 Settings mode with S button
Adding / Removing menu selected
When the menu is selected the LED will be on blue, for maximum of 10 seconds.
Advertisement
Table of Contents
Need help?
Do you have a question about the Wave i4 DC and is the answer not in the manual?
Questions and answers