Table of Contents
Advertisement
14 www.electrolux.com
Setting the clock functions
1.
Set a heating function.
2.
Press
display shows the necessary clock
function and the related symbol.
3.
Press
time. Press OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4.
Press a sensor field to stop the signal.
• With Duration
• You can use Duration
• When you use the Core tem-
7.2 Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It ac-
tivates after the baking or roasting proce-
dure ends.
• You can activate or deactivate
• Conditions for the function:
8. AUTOMATIC PROGRAMMES
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. Recipes are fixed and you can-
not change them.
again and again until the
or
to set the necessary
and End
Time
you must set the
heating function and the tem-
perature first. Then you can set
the clock function. The appli-
ance deactivates automatically.
End Time
at the same time
if you want to automatically acti-
vate and deactivate the appli-
ance at a given time later.
perature sensor (if applicable),
the Duration
and End Time
functions do not operate.
the function in the Basic Set-
tings menu.
– The set temperature is more
than 80 °C.
– The function Duration is set.
Activating the function
1.
Activate the appliance.
2.
Select the heating function.
3.
Set the temperature above 80 °C.
4.
Press
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic sig-
nal sounds.
The Heat + Hold function operates for 30
minutes.
The Heat + Hold function stays on if you
change the heating functions.
7.3 Extra Time
The Extra Time function makes the heat-
ing function continue after the Duration
ends.
and
• Applicable for all heating functions with
Duration or Weight Automatic.
• Not applicable for heating functions
with CT Sensor .
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2.
The display shows the message for
Extra Time for five minutes.
3.
Press
4.
Set the length of the Extra Time .
Press OK to confirm.
Activating the function:
1.
Activate the appliance.
2.
Select the Assisted Cooking menu.
Press OK to confirm.
3.
Select the category and dish. Press
OK to confirm.
again and again until the
to activate (or
to cancel).
Advertisement
Table of Contents
