Towing; Unloading Procedure Of Greens Mower; Precautions For Towing; Towing Procedure - Baroness TR50 Owner's Operating Manual

Unloading Procedure of Greens Mower

Caution
Before loading or unloading, chock the wheels
of the mower trailer on a level surface in a
safe location.
Caution
Be careful not to catch your foot on the mower
trailer and fall.
Caution
Make sure that there are no people around
the machine.
Caution
When unloading the greens mower, be
extremely careful as it may suddenly pull on
your hand.
1. Set the drum shaft lock lever or mower tire
lock lever to the "Release" position.
2. Set the axle lock lever to the "Release"
position.
3. Depress the pedal to release the stand stay
of the greens mower from the pedal hooks.
3
Unloading Procedure of Greens Mower_001
1 Stand stay
2 Pedal hook
3 Pedal
4. Bring the front roller into contact with the
tilting tables, and then lower the tilting tables
to the ground.
5. Move the greens mower forward to unload it
from the mower trailer.

Towing

1
2
eyaocj-004
Handling Instructions

Towing

Precautions for Towing

Warning
When towing, travel at a speed no more than
20 km/h.
Travel slowly over bad roads and uneven
surfaces.
Warning
Make turns at a low speed.
Making quick turns may cause the towing
vehicle to roll over.
Caution
Since the towing vehicle and the mower trailer
articulate at the hitch, a large turning radius
difference occurs in curves.
Be mindful of the risk of collisions caused by a
turning radius difference.
Caution
Before traveling in reverse, make sure that
there are no people behind you.
Travel in reverse at low speed while carefully
observing the movement of the trailer.
Caution
Be careful that the tow vehicle does not make
contact with the trailer and overturn while
going backward with turning on a slope.

Towing Procedure

1. Make sure that the pedal hooks are secured
onto the stand stay of the greens mower.
2. Make sure that the drum shaft lock lever or
mower tire lock lever is set to the "Lock"
position so that the greens mower will not
fall.
3. Make sure that the axle lock lever is set to
the "Lock" position so that the tilting tables
do not touch the ground.
4. Make sure that the towing vehicle and
mower trailer are securely connected.
5. Start moving the towing vehicle slowly, and
then maintain the traveling speed.
TR50
Page 5-9