Console Instruction - Fassi VR 830 User Manual

OPERATING INSTRUCTIONS

Console instruction

BUTTONS
1. MODE: Press this button to changeover display or choose the window needs to be set.
2. SET: To set value of time, distance and calories when not in scan mode.
3. RESET: Press to reset time, distance and calories. Hold it for 3 seconds to reset time, distance and calories.
FUNCTIONS
1. SCAN: Press MODE button until "SCAN" appears, computer will rotate through all the 5 functions: Time, Count, Distance, Total
Count and Calorie. Each display will be hold for 6 seconds.
2. COUNT: Display instantaneous count and the range is 0-9999 Count.
3. TIME: Count the total time from exercise start to the end and the range is 0:00 - 99:59Minute.
4. DISTANCE (DIST): Count the total distance from exercise start to the end and the range is 0.00- 9999KM.
5. CALORIES (CAL): Count the total calories consumed from exercise start to the end and the range is 0.0 - 9999 CAL.
6. TOTAL COUNT (TCNT): Count the total rowing strokes after installing the battery.
7. AUTO START/STOP: Without any signal of exercise or operation for 4 minutes, the power will turn off automatically. Once receive
exercise or operation signal, the monitor will turn on automatically.
8. ALARM: The functions of TIME, DISTANCE and CALORIW can be set countdown, any of above value goes to zero, the computer
will alarm for 10 seconds. Press MODE to select the function, then press SET button to adjust the value.
21