Contents 1 Important 7 Product information Safety Specifications Notice 8 Troubleshooting 2 Your Spotify Multiroom Speaker Introduction 9 Appendix: Understand meanings What’s in the box of LED colors What else you need Overview of the main unit 3 Prepare Download SpeakerSet Multiroom Manager to your iOS or Android device 6 Connect power and switch on 4 Connect SW700M to your home...
WOOX Innovations may void the user’s Safety authority to operate the equipment. Philips and the Philips’ Shield Emblem are • Only use attachments/accessories specified registered trademarks of Koninklijke Philips N.V. by the manufacturer.
Page 5
Trademark notice iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. Android is a trademark of Google Inc. Use of this trademark is subject to Google permissions.
Philips offers, register your product premium account) apps available on at www.philips.com/welcome. Apple App Store (for iOS devices) If you contact Philips, you will be asked for the or Google Play Store (for Android model and serial number of this apparatus. The devices)
Overview of the main unit a b c e fg • Skip to the previous/next song. • Start or pause music play. c +/- • Adjust volume. d System status indicator • Show the current status of the speaker. e DC IN •...
3 Prepare On the initial setup page, tap Setup a new speaker. Always follow the instructions in this chapter in sequence. Download SpeakerSet Multiroom Manager to your iOS or Android device (For iPod touch/iPhone/iPad users) Install SpeakerSet from Apple App Store, and then run the app.
Page 9
» The system status indicator on the front panel blinks amber during boot- » If a Wi-Fi connection has been set up for the speaker, the system status indicator turns solid green after successful connection. • The speaker enters standby mode automatically after 15 minutes of inactivity.
4 Connect * If your Wi-Fi password contains such special characters as #/:/;/’, you need to change your SW700M to password. Once connected successfully, SW700M will your home Wi- remember your home Wi-Fi settings. Whenever SW700M is powered on, it is connected to Fi network your home Wi-Fi network automatically.
Wi-Fi status indicator on the SETUP button turns solid amber. As instructed, exit the app, and then select :) Philips Setup from the list of available Wi-Fi networks. After automatic detection of the speaker successfully, open the SpeakerSet app again.
Option 3: Set up wireless connection to a WPS router directly As instructed on the app, press and hold WPS on the back of SW700M for more than 3 seconds. » The Wi-Fi status indicator on the WPS Tap Next on the above app screen, and button blinks green.
» The speaker beeps. » The Wi-Fi status indicator on the WPS button turns off. Select :) Philips Setup from the list of » The system status indicator on the available Wi-Fi networks on your PC/Mac. front panel turns solid green.
Rename speakers After successful Wi-Fi setup, go to the home page and tap the speaker icon on the app screen. Tap > beside the speaker name. Rename the speaker as you like. Tap Done to confirm.
Switch to the Spotify app from SpeakerSet or open the Spotify app directly. Log in to your Spotify premium account. Select the speaker for music streaming. Username Password Philips SW700M xxxxxx Stream music from the Spotify app to the speaker.
During play, you can: Group and ungroup speakers • press on the speaker to pause/ resume music play. Connect multiple Spotify Multiroom • press on the speaker to skip to Speakers to your home Wi-Fi network the previous/next song. (see ‘Connect SW700M to your home Wi- press +/- on the speaker to adjust •...
Page 17
Tick circles beside the speakers to add Tap the check mark at the top right on the them into the group. above app screen, and then wait for more than 10 seconds until the grouping finishes. Tap > beside the group name to enter the To ungroup speakers: edit page.
Page 18
To adjust volume of all speakers in a group at Enjoy music streamed to the group the same time: speakers Open the SpeakerSet app, then tap on the main page to enter the volume On the home page, tap the icon of the adjustment page.
Page 19
To adjust volume of an individual speaker: • Press +/- on the top panel of the speaker. • Open the SpeakerSet app, then move the slider beside the speaker on the above volume adjustment page directly. To play/pause music play: •...
6 Other features Tap Factory reset to enter the factory reset page. Restore factory settings In some cases, you may need to reset the speaker, for example, when you need to reset the Wi-Fi settings or log out from the current Spotify premium account.
Tap Firmwareupgrade to enter the Upgrade firmware firmware upgrade page. To improve the performance of SW700M, Philips may offer you new firmware for upgrade of your SW700M. Warning • Always connect your SW700M to AC power for firmware upgrade. Never power off your SW700M nor close the app during firmware upgrade.
Note General information • Product information is subject to change without prior AC power Model: OH- notice. PHILIPS 1015E1500800U1; SWITCHING POWER input: 100 - 240 SUPPLY V~, 50/60Hz, 350mA; output: Specifications 800 mA Operation Power 12 W...
Wi-Fi settings again (see ‘Connect requesting service. If the problem remains SW700M to your home Wi-Fi network’ on unsolved, go to the Philips web site (www.philips. page 8). com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model Occasional breaking of music streaming number and serial number are available.
9 Appendix: 1 blinking amber In WPS quickly, and 3 blinking mode Understand green 1 solid green Network meanings of connection successful LED colors 1 blinking green During audio quickly buffering 1 blinking green Muted or slowly playback paused 1 dimmed by 50% in In standby solid green mode with...
Page 25
Open Source Declaration for Philips SW700M/SW750M/SW100M ALAC FLAC Iperf jQuery JSBN 1.2 Jungo USB DFU Driver Marvell WPS2 Client mDNSResponder OpenSSL RSA MD5 zlib getopt Mongoose Tremor ALAC http://alac.macosforge.org/ The Apple Lossless Audio Codec sources are available under the Apache license. Details can be found here http://www.apache.org/licenses/LICENSE-2.0.
Page 26
The reference implementation libraries are licensed under the New License. In simple terms, these libraries may be used by any application, Open or proprietary, linked or incorporated in whole, so long as acknowledgement is made to Xiph.org Foundation when using the source code in whole or in derived works. The Xiph License is free enough that the libraries have been used in commercial products to implement FLAC, including in the firmware of hardware devices where other Open Source licenses can be problematic.
Page 27
Neither the names of the University of Illinois, NCSA, nor the names of its contributors may be used to endorse or promote products derived from this Software without specific prior written permission. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
Page 28
* without limitation the rights to use, copy, modify, merge, publish, * distribute, sublicense, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software.
Page 29
http://www.opensource.apple.com/source/mDNSResponder/mDNSResponder-320.10.80/ The majority of the source code in the mDNSResponder project is licensed under the terms of the Apache License, Version 2.0, available from: <http://www.apache.org/licenses/LICENSE-2.0> To accommodate license compatibility with the widest possible range of client code licenses, the shared library code, which is linked at runtime into the same address space as the client using it, is licensed under the terms of the "Three-Clause BSD License".
Page 30
* the merchantability of this software or the suitability of this * software for any particular purpose. It is provided "as is" * without express or implied warranty of any kind. * These notices must be retained in any copies of any part of this * documentation and/or software.
Page 31
Mongoose https://github.com/cesanta/mongoose/ Mongoose is released under commercial and GNU GPL v.2 open source licenses. The GPLv2 open source License does not generally permit incorporating this software into non-open source programs. For those customers who do not wish to comply with the GPLv2 open source license requirements,Cesanta Software offers a full, royalty-free commercial license and...