Faqs And Troubleshooting Guide - Stirling STR-CD60 Instruction Manual

FAQs and Troubleshooting Guide

Troubleshooting guide
If your clothes dryer has a fault, is not working properly, or you think it should work
better, use the list below to identify and solve any problems.
If you cannot solve the problem, switch off the dryer and unplug it from the power
supply. Then contact our after sales support centre for advice. Do not attempt to
dismantle or repair the dryer yourself.
Problem
The dryer does
not start.
Clothes shrink. Are the clothes are unsuitable for
The washing is
not thoroughly
dried.
There are
some strange
noises.
AFTER SALES SUPPORT
20
Possible cause
Is the power plug inserted firmly?
Is the door closed?
Is the power switched on at the
wall socket?
Have you pressed the POWER
and START/PAUSE buttons?
drying in the clothes dryer?
Have the clothes been dried at too
high heat?
Is the filter clogged?
Is the air inlet dirty?
Was an inappropriate program
chosen?
Is there too much washing in the
dryer?
Has the washing been twisted
while drying?
Heavy, wet clothes tumbling in the
drum can cause bumping noises
when the drum is turning.
1300 112 534
AUS
Solution
Insert the power plug firmly.
Close the door securely.
Switch on power at the wall
socket.
Press the POWER and START/
PAUSE button.
Check the clothes labels and
hang dry, if recommended.
If the clothes may be tumble
dried, choose a lower drying
temperature more suitable for the
fabric.
Check and clean the lint filter.
Check and clean the air inlet.
Choose a program with a higher
drying intensity.
Reduce the amount of washing
in the dryer.
Untwist the items and dry them
for a little longer.
These noises are normal. Make
sure your drying load is properly
spin dried to limit the noises.
MODEL: STR-CD60 PRODUCT CODE: 714424 04/2024
tempo.org/support