Page 2
We take pride in the craftsmanship, innovation and design that goes into every GE Profile product, and we think you will too. Among other things, registration of your appliance ensures that we can deliver important product information and warranty details when you need them.
▪ Install the rear brackets on the bottom of the Combo. Use the top 2 holes on the bottom of the Combo with the tab on the bracket facing the outside. 2 | GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
Page 5
▪ Remove the 4 shipping bolts on the back side of the Combo and the top brace. 8. FINALIZE THE INSTALLATION ▪ Refer to the Combo installation instructions to complete the installation. GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
3. Use a standard hose rubber washer in the end of the hose that is connected to hot or cold valves of the Combo. 4 | GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
3. Insert the new foam pad into the filter frame, ensuring proper alignment using the locating tabs. 4. Snap the frame back into place and return the dual stage lint filter back to the Combo. GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
• Designed for the Combo and conventional dryer venting and more. Watch this video to see how these brushes are used in the cleaning of the Combo filter area. 6 | GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
3. The instructions for proceeding are different depending on the appliance you’re connecting. Follow the links below for each individual appliance you want to connect. GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
Page 10
▪ Attach the hose connector to the faucet adapter by pulling down on the locking collar while lifting up on the connector until it snaps into place. Ensure the water filter is in place. 8 | GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
Page 11
Sanitize cycle, the Confirm H2O Supply is prevent Fault Code: 8 Combo will alert water from Dismiss you that you must leaking adjust the water from this temp at the sink. connection. GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
7. Reinstall drain hose into stand pipe. Drain hose should be no more than 5 inches into the stand pipe. Test to ensure there are no leaks. NOTE: DO NOT use more than 1 extension drain hose kit. 10 | GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
• WR97X27706 Color has been formulated to hide / fill scratches on the Combo’s metal and plastic panels. • Applicator brush integrated into the cap. GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com | 11...
Page 14
12. Secure each drain tube properly using zip-ties so that they do not move during usage. 12 | GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
Page 15
5. When moving the Combos into their final location, ensure that you do not unplug or interfere with these cords. Watch the installation video if you need further assistance. GE PROFILE UltraFast Combo Accessories Guide | www.geappliances.com...
Page 16
GE Profile UltraFast Combo with Ventless Heat Pump Technology Washer/Dryer PFQ97HSPVDS Wash + Dry NO load transfer 50% More Energy in 1 machine 2 jobs in 1 Efficient Drying** w/ Ventless Heat Pump For more information www.geappliances.com/ge/connected-appliances/ultrafast-2-in-1-washer-dryer-combo GE Appliances 4000 Buechel Bank Road...
Need help?
Do you have a question about the Profile UltraFast Combo PFQ97HSPVDS and is the answer not in the manual?
Questions and answers