Table of Contents
Advertisement
5.
Lift the touchpad straight up to remove it from the computer.
To install the touchpad click board and touchpad, reverse this procedure.
USB/power button board
To remove the USB/power button board, use this procedure and illustration.
Table 5-9
USB/power button board and cable descriptions and part numbers
Description
USB/power button board
USB/power button board cable
USB/power button board bracket
Before removing the USB/power button board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the rubber feet (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
To remove the USB/power button board:
1.
Disconnect the cable from the ZIF connector (1) on the board
2.
Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board to the computer.
40
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Rubber feet on page
Bottom cover on page
Battery on page
32).
30).
31).
Spare part number
N96335-001
N96337-001
P04607-001
30).
Advertisement
Table of Contents
