Yoer TRIFANO BF02BK Instruction Manual page 21

TABLE FAN
Insert the joint (B) into the hole of the base (C) and screw the nut (D) from the
bottom to fix firmly.
Insert the fan head (A) into the joint and screw the fixing screw to fix firmly.
Install all parts of the fan head as written in ,,Fan head installation''.
WALL FAN
Mount the handle (E) on the wall by screwing 4 screws and insert the fan
head (A). Screw the fixing screw to block all.
Install all parts of the fan head as written in ,,Fan head installation''.
FAN HEAD INSTALLATION
Insert all parts (3-8) in order as illustrated on the picture into the head axle (2) and fix firmly
on the motor (1).
Note: Remember to lock the guard (7) with the screw to ensure safe operation of the device.
ENGLISH
21