Titan TTB949MLT Manual

Rotary multi tool 130w

Hide thumbs Also See for TTB949MLT:

Manual (41 pages)

Table Of Contents

Quick Links

Download this manual

Rotary Multi Tool

130W

TTB949MLT

EAN: 5063022074218

WARNING: Read the instructions before using the product!

V11101/ BX220IM

Table of Contents

Need help?

Do you have a question about the TTB949MLT and is the answer not in the manual?

Questions and answers

Summary of Contents for Titan TTB949MLT

Page 1 Rotary Multi Tool 130W TTB949MLT EAN: 5063022074218 WARNING: Read the instructions before using the product! V11101/ BX220IM...
Page 2 Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety information Your product Technical Before you start detail... more Product functions & Settings Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee...
Page 3 Safety information TTB949MLT by TITAN Safety warnings General power tool safety warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
Page 4 Safety information TTB949MLT by TITAN Safety warnings c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Page 5 Safety information TTB949MLT by TITAN d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times.
Page 6 Safety information TTB949MLT by TITAN Safety warnings e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Page 7 Safety information TTB949MLT by TITAN designed recommended tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation. c) The rated speed of the grinding accessories must be at least equal to the maximum speed marked on the power tool.
Page 8 Safety information TTB949MLT by TITAN Safety warnings g) Do not use a damaged accessory. Before each use inspect the accessory such as abrasive wheels for chips and cracks, sanding drum for cracks, tear or excess wear, wire brush for loose or cracked wires.
Page 9 Safety information TTB949MLT by TITAN Hold power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live”...
Page 10 Safety information TTB949MLT by TITAN Safety warnings q) Regularly clean the power tool’s air vents. The motor’s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards. materials. Sparks could ignite these materials.
Page 11 Safety information TTB949MLT by TITAN b) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
Page 12 Safety information TTB949MLT by TITAN Safety warnings c) Do not “jam” a cut-off wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or snagging of the wheel in the cut and the possibility of kickback or wheel breakage.
Page 13 Safety information TTB949MLT by TITAN h) Use extra caution when making a “pocket cut” into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback. operations: a) Be aware that wire bristles are thrown by the brush even during ordinary operation.
Page 14 Safety information TTB949MLT by TITAN Safety warnings c) Keep hands away from the drilling area. Do not reach under the workpiece. Contact with the drill bit can lead to injuries. d) Use suitable detectors to determine if there are hidden supply lines or contact the local utility company for assistance.
Page 15 Safety information TTB949MLT by TITAN c) Selection of abrasives Information on the label or the abrasive as well as restrictions of use, safety indications or any other instruction shall be followed. In case of doubt concerning the selection of abrasives, the user shall request information from the manufacturer or supplier.
Page 16 Safety information TTB949MLT by TITAN Safety warnings Silica is a natural mineral present in large amounts in things like sand, sandstone and granite. It is also commonly found in many construction materials such as dust (also known as Respirable Crystalline Silica or RCS)
Page 17 Safety information TTB949MLT by TITAN Please always work with approved safety equipment, out microscopic particles and use the dust extraction facility at all time. http://www.hse.gov.uk/construction or http://www.hse.gov. uk/pubns/cis69.pdf WARNING! Some dust particles created by power sanding, sawing, grinding, drill and other...
Page 18 Safety information TTB949MLT by TITAN Safety warnings maintained. 3. Use correct attachments for the product and ensure they are in good condition. 4. Keep tight grip on the handles/grip surface. 5. Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).
Page 19 Safety information TTB949MLT by TITAN Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: 1.
Page 20 Local Authority or local store for recycling advice. evaluation method of conformity for these directives was done. UK Conformity Assessed. Rating label explanation Rotary Multi Tool: TTB949MLT TT = TITAN (brand) B = Voltage (220-240 V~) 949 = Sequential Code...
Page 21 Your product TTB949MLT by TITAN Product description 44 45 46 47 48 49 50...
Page 22 Your product TTB949MLT by TITAN Product description 1. Tool socket 23. Pointed polishing 39. Radial nylon brush a) Clamp nut felt wheel (9.5mm x (19mm x 41mm) b) Collet (ø3.2mm) 19mm) 40. Rust free radial brush (pre-mounted) 24. Felt polishing wheel...
Page 23 TTB949MLT by TITAN General > Rated voltage, frequency : 220-240 V~, 50 Hz > Rated power input : 130 W > Rated speed n : 10000 - 37000 min > Spindle thread : M7 > Protection class : II > Degree of protection : IP20 >...
Page 24 TTB949MLT by TITAN WARNING! The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used especially what kind of workpiece is processed;...
Page 25 Before you start TTB949MLT by TITAN Felt polishing wheel (25.4mm x 6.35mm) (21) Cloth polishing wheel 16-layer (25.4mm x 3.4mm) (22) Pointed polishing felt wheel (9.5mm x 19mm) (23) Felt polishing wheel (12mm x 6mm) (x4) (24) Rod for grinding wheel (x3) (25) Fiberglass cut-off wheel (32mm x 1.2mm) (x5) (26)
Page 26 Before you start TTB949MLT by TITAN Assembly WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the pictures...
Page 27 Before you start TTB949MLT by TITAN 22000)
Page 28 Before you start TTB949MLT by TITAN Assembly NOTE: the brushes (37 / 38 / 39 / 30 / 41 /42 / 43) and the cutters (44 / 45 / 46 / 47 / 48 / 49 / 50) are ready to be inserted. The polishing wheel mandrel (19) and the grinding belt mandrel (32 / 34) must be assembled before using.
Page 29 Before you start TTB949MLT by TITAN Grinding belt 1. Align the grinding belt (33 / 35) with the grinding belt mandrel (32 / 34) and slide the grinding belt (33 / 35) onto it (Fig. 2). Fig. 2 Inserting the tool attachment WARNING! Always ensure that the shaft diameter of the tool attachment Specialized dealers offer collets in different sizes (Ø3.2mm, Ø2.3mm...
Page 30 Before you start TTB949MLT by TITAN Assembly 3. The pre-mounted collet (Ø3.2mm) (1b) suitable most tool attachments except for the HSS steel drill bit (53) with the size of Ø2.3mm, Ø1.6mm, remove the clamp nut (1a) and collet (1b) from the spindle (1c) (Fig.
Page 31 Before you start TTB949MLT by TITAN Connection to power supply 1. Make sure the on/off switch (9) is in its OFF position. 2. Connect the plug of the power cord with a suitable power socket. WARNING! Check the voltage! The voltage must comply with the information on the rating label! 3.
Page 32: Table Of Contents
TTB949MLT by TITAN more detail... Product functions & Settings Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Declaration of conformity...
Page 33: Product Functions & Settings
Product functions & Settings TTB949MLT by TITAN Intended use This Rotary Multi Tool TTB949MLT is designated with a rated input of 130 Watts. The intended use of this product includes the use of the corresponding tool attachment: rough grinding of wood, welds, plastics, leather and nonferrous metal;...
Page 34: Operation
Product functions & Settings / Operation TTB949MLT by TITAN Speed dial Limit the maximum speed by turning the speed dial (7) to display the number marking (Fig. 8): Turn the speed dial (7) left to decrease the speed to a small number.
Page 35 Operation TTB949MLT by TITAN 5. Switch the product off immediately if you are disturbed while working by other people entering the working area. Always let the product come to complete stop before putting it down. 6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work and have full control over the product.
Page 36: Care And Maintenance
Operation / Care and maintenance TTB949MLT by TITAN Working position Depending on the application, the product must be held in different positions in order to work safely and reach optimal work results. 2. For rough work, such as grinding, hold the product like a hammer shaft (Fig.
Page 37 Care and maintenance TTB949MLT by TITAN 3. Inspect the product before each use for worn and damaged parts. Do not WARNING! Only perform repairs and maintenance work according to specialist! General cleaning 1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for areas that are hard to reach.
Page 38 Care and maintenance TTB949MLT by TITAN UK plug (for UK only) AMP fuse Connect approved to Blue to BS 1362 N(Neutral) Brown L(Live) Outer sleeve Cable grip WARNING! Never connect live or neutral wires to the earth terminal of Amp BS 1363 or BS 1363/A plug and correctly rated...
Page 39: Troubleshooting
Care and maintenance / Troubleshooting TTB949MLT by TITAN Transportation 1. Switch the product off and disconnect it from the power supply. 2. Attach transportation guards, if applicable. 3. Always carry the product by its grip handle (4 / 12). 4. Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles.
Page 40: Recycling And Disposal
Recycling and disposal TTB949MLT by TITAN Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. For further information visit www.recycle-more.co.uk.
Page 41: Guarantee
Guarantee TTB949MLT by TITAN Guarantee We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product ( Rotary Multi Tool 130W) has a manufacturer’s guarantee of...
Page 42: Declaration Of Conformity
Declaration of conformity TTB949MLT by TITAN (UK) DECLARATION OF CONFORMITY Product Rotary Multi Tool TTB949MLT SN: 000001-999999 Name and address of the manufacturer or his authorised representative: 1 Paddington Square London W2 1GG United Kingdom This declaration of conformity is issued under the sole responsibility of the manufacturer.
Page 43 Declaration of conformity TTB949MLT by TITAN (EN) EU DECLARATION OF CONFORMITY (FR) DÉCLARATION UE DE CONFORMITÉ (ES) DECLARACIÓN UE DE CONFORMIDAD (PT) DECLARAÇÃO DE CONFORMIDADE UE Product / Produit / Produkt / Produsul / Producto / Produto Rotary Multi Tool/Outil Rotatif Multifonction/Narzedzie Wielofunkcyjne Obrotowe/Unealta Multifunc ionala...
Page 44 Declaration of conformity TTB949MLT by TITAN elektrycznym i elektronicznym y electrónicos elétricos e eletrónicos relation to which conformity is declared: Références des normes harmonisées pertinentes appliquées, y compris la date de celles-ci, ou des autres Referencias a las normas armonizadas pertinentes utilizadas, incluidas las fechas de las normas, o referencias a...
Page 45 Kingfisher International Products Limited Kingfisher International Products Limited 1 Paddington Square, London, W2 1GG 1 Paddington Square, London, W2 1GG United Kingdom United Kingdom www.kingfisher.com/products www.kingfisher.com/products Kingfisher International Products B.V. Kingfisher International Products B.V. Rapenburgerstraat 175E Rapenburgerstraat 175E 1011 VM Amsterdam 1011 VM Amsterdam The Netherlands The Netherlands...

This manual is also suitable for:

5063022074218