Switching On And Temperature Selection - Electrolux SERVICE 7000 Instructions For The Use

In such cases the guarantee and other lia-
bilities are rendered null and void.
If the connection cable of the unit is
■
damaged it must be replaced by the
manufacturer or by his customer service
or by a similarly qualified person to avoid
any liability.
Warning: do not operate any electrical-
■
ly-driven devices inside the foodstuff
compartment.

Switching on and temperature selection

(fig. @)
The temperature controller serves for set-
ting the temperature and switching the
refrigerator on and off.
Important:
The appliance is designed to operate at
room temperatures between +10° and
+32°C. The maintaining of the internal
temperatures of the cooling and freezing
compartments can no longer be guaran-
teed at room temperatures outside this
range.
@
Normal operation
Set the temperature to a position between
the two temperature symbols (warmer top,
colder bottom) according to the desired
cooling compartment temperature. A tem-
perature of -18°C is reached in the free-
zing compartment from a temperature of
5°C or lower in the cooling compartment
(see also Tips). This conditions are satisfied
from an approximately central position of
the controller.
Low ambient temperature (fig. ;)
Set controller to the symbol for a warmer
cold compartment temperature.
The fridge light may occasionally switch on
automatically less brightly with the door
closed to prevent an undesired
temperature in the freezer. Does the light
flash with the door open (see faults).
;
rise on
29