ZyXEL Communications ZyWall 2 Plus Firmware Release Notes page 29

delete firewall e-mail
attack
set <set#>
set <set#>
insert firewall e-mail
attack
set <set#>
set <set#>
cli
IP Related Command
ip
address
alias
aliasdis
alg
disp
enable
disable
siptimeout
arp
status
dhcp
destaddr-single <ip
address>
destaddr-subnet <ip
address> <subnet
mask>
destaddr-range
<start ip address>
<end ip address>
tcp destport-single
<port#>
tcp destport-range
<start port#> <end
port#>
udp destport-single
<port#>
udp destport-range
<start port#> <end
port#>
desport-custom
<desired custom port
name>
custom-ip <desired
custom service
name>
custom-icmp
<desired custom
service name>
rule <rule#>
rule <rule#>
Command
[addr]
<iface>
<0|1>
<ALG_FTP|ALG_H323|ALG_SIP>
<ALG_FTP|ALG_H323|ALG_SIP>
<timeout in second> or 0 for no timeout
<iface>
<iface>
Select and edit a destination address of a packet which
complies to this rule
Select and edit a destination address and subnet mask if a
packet which complies to this rule.
Select and edit a destination address range of a packet
which complies to this rule.
Select and edit the destination port of a packet which
comply to this rule. For non-consecutive port numbers,
the user may repeat this command line to enter the
multiple port numbers.
Select and edit a destination port range of a packet which
comply to this rule.
Select and edit the destination port of a packet which
comply to this rule. For non-consecutive port numbers,
users may repeat this command line to enter the multiple
port numbers.
Select and edit a destination port range of a packet which
comply to this rule.
Type in the desired custom port name
Type in the desired User Defined IP Protocol custom
service.
Type in the desired ICMP custom service
Remove all email alert settings
Reset all alert settings to defaults
Remove a specified set from the firewall configuration
Remove a specified rule in a set from the firewall
configuration
Insert email alert settings
Insert attack alert settings
Insert a specified rule set to the firewall configuration
Insert a specified rule in a set to the firewall
configuration
Display the choices of command list.
Home
FLag
display host ip address
R alias iface
R disable alias
Show ALG enable disable status
Enable ALG command
Disable ALG command
Configure SIP timeout command
display ip arp status
R
Description