Disassembly For Repair.v.cccccscccsosssssssssesssessesesseeeees - Kenwood UD-300 Service Manual

DISASSEMBLY FOR REPAIR
(Remove the metallic cabinet from the
body beforehand)
(A-A3)
@) Removing the front panel ass'y.
1} Remove volume knob @.
2) Remove 2 screws @.
3) Remove 2 screws 6. )
4) Pull out front panel ass'y frontwards with care of
connectors C4] :
6) Remove 4 screws Gor the transformer.
7) Remove 1 screw @ .
8) Remove 2 screws ©.
9) Remove the chassis of bottom board ©.
(X-A3)
@ Removing the front panel ass'y.
{
1) Insert the driver to push the slider, into the rightside hole of
mechanism ass'y (@).
2) Pull out the tray (@).
3) Remove the tray panel (@).
4) Push the tray backwards ().