Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for diatools V200 PRO
- Page 1 Automotive Circuit Probe & Breaker Finder Kit V200 PRO...
-
Page 2: Table Of Contents
Table of Contents 1. IMPORTANT SAFETY INFORMATION..........1 2. USING THE CIRCUIT PROBE..............1 2.1 SPECIFICATIONS.............................1 2.2 TOOL KIT DESCRIPTION........................2 2.3 PARTS LIST..............................3 2.4 GENERAL DESCRIPTION........................3 2.4.1 CIRCUIT PROBE..........................3 2.4.2 CIRCUIT BREAKER FINDER......................4 2.5 POWER...............................4 2.6 QUICK SELF-TEST..........................4 2.7 AUTO CIRCUIT BREAKER........................5 2.8 WORK MODE............................5 3. -
Page 3: Important Safety Information
Automotive Circuit Probe & Breaker Finder Kit 1. Important safety information To prevent personal injury or damage to vehicles and/or the circuit probe,read this instruction manual first and observe the following safety precautions whenever working on a vehicle: Always perform automotive testing in a safe environment. ◆... -
Page 4: Tool Kit Description
Automotive Circuit Probe & Breaker Finder Kit Operating Temperature 0 to 60°C (32 to 140°F) Storage Temperature -40 to 70°C (-40 to 185°F) 184 × 48 × 24mm/7.24 X 1.88 X 0.94 In Dimensions (L × W × H) (Probe Length 72mm/2.83 In) 2.2 Tool Kit Description ①... -
Page 5: Parts List
Automotive Circuit Probe & Breaker Finder Kit ⑨ Red Positive Wire - Used to deliver current. ⑩ Loudspeaker - Alert prompt. ⑪ Tool Kit Working Mode Switch - Switch between Circuit Probe(I) and Breaker Finder(II) working modes. ⑫ Antenna - Receive Data. ⑬... -
Page 6: Circuit Breaker Finder
Automotive Circuit Probe & Breaker Finder Kit 2.4.2 Circuit Breaker Finder The Circuit Breaker Finder detects and alerts you immediately where a circuit is open. ◆ You can quickly and easily locate open circuits, open connections, broken wires, current ◆ leaks, and even trace wires. -
Page 7: Auto Circuit Breaker
Automotive Circuit Probe & Breaker Finder Kit Figure 1 IMPORTANT: When powering-up components, you can increase the life of power switch in the tool if you first press the switch, then contact the tip to the component. The arcing will take place at the tip instead of the contacts of the switch. - Page 8 Automotive Circuit Probe & Breaker Finder Kit While the circuit probein this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt. (Figure 2) 12.1V Figure 2 AC voltage While the circuit probe in this mode, contact the probe tip to a circuit, then the LCD display will read the Max.
-
Page 9: Operationg Instructions
Automotive Circuit Probe & Breaker Finder Kit 1.2K Figure 4 Diode In this mode, the probe tip contact the positive terminal of the diode, connect the auxiliary ground lead to the negative terminal of the diode, the screen will display the forward voltage drop, indicates the forward bias. - Page 10 Automotive Circuit Probe & Breaker Finder Kit Figure 6 Figure 7...
-
Page 11: Continuity Testing
Automotive Circuit Probe & Breaker Finder Kit 3.2 Continuity Testing While the circuit probeis in Resistance mode, using the probe tip and the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehide's electrical system. When the probe tip is contacting a good ground, the LCD will indicate “0.0Ω”... -
Page 12: Signal Circuit Testing
Automotive Circuit Probe & Breaker Finder Kit If the resistance value is greater than 100KΩ, the LCD will show “0L”. There is also another way to prove continuity of connections to ground or battery.Power up the connection using the power switch. If the circuit breaker trips, you have a good solid low resistance connection. -
Page 13: Activating Components In The Vehicle
Automotive Circuit Probe & Breaker Finder Kit the green LED should light up, indicating continuity through the component. While keeping an eye on the green LED, quickly press and release the power switch forward. If the green LED went out and the red LED came on, you may proceed with further activation. Push the power switch forward and hold it down to provide power to your component. -
Page 14: Testing Trailer Lights And Connections
Automotive Circuit Probe & Breaker Finder Kit While the circuit probe in DC Voltage mode, contact the probe tip to the positive terminal of the component, the green LED should light up, indicating continuity to ground. While observing the green LED. Quickly press the power switch button forward and release, if the green LED went out and the red LED comes on, you may proceed with further activation. -
Page 15: Activating Components W/Ground
Automotive Circuit Probe & Breaker Finder Kit When the tool in DC Voltage mode, clip the auxiliary ground lead to the trailer ground, probe the contacts at the jack and then apply voltage to the probe tip. This allows you check the function and orientation of the connector and trailer lights. -
Page 16: Red/Green Polarity Led
Automotive Circuit Probe & Breaker Finder Kit Figure 14 WARNING: With this function, if you are contacting a protected circuit, a vehicle’s fuse can be blown or tripped if you apply ground to it. 3.8 Red/Green Polarity LED The Red/Green Polarity LED lights up when the probe tip voltage matches the battery within ±0.4 volts. -
Page 17: Following & Locating Short Circuits
Automotive Circuit Probe & Breaker Finder Kit 3.9 Following & Locating Short Circuits In most cases a short circuit wil appear by a fuse or a fusible link blowing or an electrical protection device tripping (i.e., a circuit breaker). This is the best place to begin the search. Remove the blown fuse from the fuse box. -
Page 18: Circuit Breaker Finder Knowledge
Automotive Circuit Probe & Breaker Finder Kit 5. Circuit Breaker Finder Knowledge Is circuit breaker finder computer and air bag safe? The circuit breaker finder LED and LCD pull no more than 1 millamp of current, therefore when using it as a test light or multimeter it is computer and airbag safe. However, pressing the power switch is a different story. -
Page 19: Breaker Finder Operation Guide
Automotive Circuit Probe & Breaker Finder Kit 6.3 Breaker Finder Operation Guide With the probe kit connected to power, select Mode II on the tool kit working mode switch button. Switch on the breaker finder and set the rotary switch to the middle position. Press and hold the TEST button, and move the black probe tip along the wire you want to test. -
Page 20: Warranty And Service
7. Warranty and Service 7.1 Limited One Year Warranty This warranty is expressly limited to buyer who purchase VDIAGTOOL V200 Pro product for purposes of resale or use in the ordinary course of the buyer’s bussiness. VDIAGTOOL V200 Pro is warranted against defects in materials and workmanship for one year (12 months) from date of delivery to the buyer. - Page 21 Automotive Circuit Probe & Breaker Finder Kit Copyright Information ©2017 Shenzhen vdiagtool Technology Co., Ltd All rights reserved Disclaimer The information, specifications and illustrations in this user manual are based on the latest information available at the time of printing. VDIAGTOOL reserves the right to make changes at any time without prior notice.
- Page 22 Automotive Circuit Probe & Breaker Finder Kit YouTube: https://www.youtube.com/@VdiagTool12 Reddit: https://www.reddit.com/r/vdiagtool/ Invent with us, test products before they hit market, help us make better products for everyone: E-Mail: inventers@vdiagtool.com Create social media content, post online and help our community: E-Mail: marketing@vdiagtool.com...
Need help?
Do you have a question about the V200 PRO and is the answer not in the manual?
Questions and answers