Husqvarna 435i Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Chainsaw
  5. 435i
  6. Operator's manual
Husqvarna 435i Operator's Manual

Husqvarna 435i Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
435i
EN
Operator's manual
2-37

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna 435i

Summary of Contents for Husqvarna 435i

  • Page 1 435i Operator's manual 2-37...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Troubleshooting............32 Safety................4 Transportation, storage and disposal......33 Assembly..............12 Technical data.............. 33 Operation..............14 Accessories..............34 Battery safety..............23 Declaration of Conformity..........36 Maintenance..............24 Registered trademarks..........37 Introduction Intended use Product description This chainsaw for forest service is designed for forest This product is a chainsaw model with an electric motor.
  • Page 3 31. Operator's manual Chain oil. 32. Bar knob 33. Drive sprocket cover with bar bolt Recommended cutting equipment in this Husqvarna HXX example: Bar length XX in (XX mm), Symbols on the product max. nose radius X Teeth, chain type XX mm/XX Husqvarna HXX.

  • Page 4: Safety

    Double insulation. production week. Manufacturer Note: Other symbols/decals on the product refer to Husqvarna certification requirements for some markets. Drottninggatan 2, SE-561 82, Huskvarna, Sweden, tel: +46-36-146500 Symbols on the battery and/or on the Product damage...
  • Page 5 • Do not expose power tools to rain or wet conditions. • Do not use the power tool if the switch does not Water entering a power tool will increase the risk of turn it on and off. Any power tool that cannot be electric shock.
  • Page 6 temperature above 130 °C / 266 °F may cause • Carry the chain saw by the front handle with the explosion. chain saw switched off and away from your body. When transporting or storing the chain saw, always • Follow all charging instructions and do not charge fit the guide bar cover.
  • Page 7 Do not let children use or be near the product. The • Turn to your servicing dealer or Husqvarna if you product is easy to start and children may be able to have questions about the operation of the product.
  • Page 8 are on a ladder or in a tree. Do not use the product if on a transportation guard on the guide bar before you are not on stable ground. transportation or before you move it for any distance. • Working in a tree requires the use of special •...
  • Page 9 If the safety devices are damaged or do not operate The chain brake engages (A) manually by your left hand correctly, speak to your Husqvarna servicing dealer. or automatically by the inertia release mechanism. Push the front hand guard (B) forward to engage the chain...
  • Page 10 brake manually. This movement starts a spring-loaded mechanism that stops the drive sprocket. A kickback can be very sudden and intense. Most kickbacks are small and do not always engage the chain brake. If a kickback occurs when you use the product, hold tightly around the handles and do not let go.
  • Page 11 • Do not use other battery chargers than the one positions. supplied for your product. Only use Husqvarna QC chargers when you charge Husqvarna replacement batteries BLi. • Do not try to disassemble the battery charger.

  • Page 12: Assembly

    Safety instructions for the cutting equipment • Make sure that the saw chain has the correct tension. If the saw chain is not tight against the guide WARNING: bar, the saw chain can derail. An incorrect saw chain Read the warning tension increases wear on the guide bar, saw chain instructions that follow before you use the Accessories on...
  • Page 13 3. Remove the drive sprocket cover and the 1. Disengage the chain brake. transportation ring (A). 2. Loosen the bar nut and remove the drive sprocket cover and the transportation ring (A). 4. Put the guide bar on top of the bar bolt. Steer the guide bar to its most rear position.

  • Page 14: Operation

    • Use Husqvarna chain oil for maximum saw chain life 1. Do a check of the chain brake (A) to make sure that and to prevent negative effects on the environment. it operates correctly and that it is not damaged.
  • Page 15 To connect the battery to the battery Kickback information charger WARNING: A kickback can cause Note: serious injury or death to the operator or Charge the battery if it is the first time that you others. To decrease the risk you must know use it.
  • Page 16 3. Put the battery in the battery holder. WARNING: No saw chain fully prevents kickback. Always obey the instructions. Common questions about kickback • Will the hand always engage the chain brake during a kickback? No. It is necessary to use some force to push the front hand guard forward.
  • Page 17 To stop the product 1. Push and hold the start/stop button until the green LED light goes off. 2. Push the battery release buttons and remove the battery from the battery holder to prevent accidental WARNING: start. If the saw chain is caught in the trunk, the product can be pushed at you.
  • Page 18 WARNING: Cut pieces in the work area increase the risk of kickback and that you cannot keep your balance. To use the spiked bumper 1. Push the spiked bumper into the trunk of the tree. 2. Apply full power and rotate the product. Keep the 1.
  • Page 19 to a professional chainsaw operator WARNING: There is a high accident before you continue. risk when you use the limbing technique. To cut trees and branches that are Refer to 2. Remove the limbs on the top of the trunk. in tension on page 22 for instructions how a) Keep the product on the trunk and let the guide to prevent kickback.
  • Page 20 Speak to an operator with experience for 6. Do not let the tree fall onto a different standing tree. more knowledge. It is dangerous to remove a caught tree and there is To free a trapped tree a high accident risk. Refer to on page 22 .
  • Page 21 To fell a tree Husqvarna recommends you to make the directional cuts and then use the safe corner method when you 2. Make sure that the directional cut line is perfectly fell a tree.
  • Page 22 a) Make a bore cut straight into the trunk to 4. Cut off the corner to make the tree fall. complete the felling hinge width. Note: If the tree does not fall, hit the wedge until it does. 5. When the tree starts to fall, use the path of retreat to move away from the tree.

  • Page 23: Battery Safety

    • Use the BLi batteries that are rechargeable as a with a large quantity of water and soap. Get medical power supply for the related Husqvarna products aid. Approved batteries on page 35 . To only. Refer to •...

  • Page 24: Maintenance

    Maintenance Introduction The following is a list of the maintenance steps that you Maintenance on page 24 must do on the product. See for more information. WARNING: Read and understand the safety chapter before you do maintenance on the product. Maintenance schedule WARNING: Remove the battery before...
  • Page 25 Maintenance and checks of the safety WARNING: Make sure that the saw devices on the product chain does not touch the ground or other objects. To do a check of the front hand guard 2. Wrap your fingers and thumbs around the handles Regularly do a check of the front hand guard and the and hold the product tight.
  • Page 26 3. Make sure that the power trigger is locked at the idle 2. Clean the cooling slots and battery connectors. position when the power trigger lockout is released. 4. Start the product and apply full power. 5. Release the power trigger and make sure that the saw chain stops and stays stationary.
  • Page 27 • Chain oil hole and hole for chain tensioner. The by Husqvarna. This is necessary to keep the safety guide bar must align with product. Accessories on functions of the product. Refer to page 34 , for a list of replacement bar and chain combinations that we recommend.
  • Page 28 It is not easy to sharpen a saw chain correctly without for instructions about how to receive the correct depth the correct equipment. Use a Husqvarna recommended gauge setting for your saw chain. file gauge. This will help you to keep maximum cutting performance and the kickback risk at a minimum.
  • Page 29 1. Use a flat file and a depth gauge tool to adjust the depth gauge setting. Only use a Husqvarna recommended depth gauge tool to get the correct depth gauge setting and bevel for the depth gauge.
  • Page 30 3. Tighten the saw chain until it is tight against the 2. If the saw chain lubrication is correct, you will see a guide bar. clear line of oil on the surface after 1 minute. 4. Tighten the bar nut with the combination wrench and lift the front of the guide bar at the same time.
  • Page 31 To do a check of the chain drive To do a check of the guide bar sprocket 1. Make sure that the oil channel is not blocked. Clean if it is necessary. • Examine the chain drive sprocket for wear. Replace the chain drive sprocket if it is necessary.

  • Page 32: Troubleshooting

    7. Turn the guide bar daily to extend its life cycle. Troubleshooting User interface LED screen Possible faults Possible solution The warning in- Chain brake is Disengage the chain brake. dicator flashes. engaged. Temperature Let the product to cool down. deviation.

  • Page 33: Transportation, Storage And Disposal

    Charge the battery 30% to 50% before you put it in storage for long periods. • Put the battery charger in storage in a space that is closed and dry. Technical data Technical data 435i Motor Type BLDC (brushless) 36V 2190 - 004 - 12.01.2024...

  • Page 34: Accessories

    20/(18) Accessories Guide bar and saw chain combinations The following cutting attachments are approved for Husqvarna 435i. Noise emissions in the environment measured as sound power (L ) in conformity with EC directive 2000/14/EC. Reported data for sound pressure level for the machine has a typical statistical dispersion (standard deviation) of 3 dB (A).
  • Page 35 The part numbers are given in the table below. Using Husqvarna file gauge will give you the correct If you do not know which saw chain you have on your filing angles. We recommend you to always use a product, turn to your servicing dealer.

  • Page 36: Declaration Of Conformity

    Declaration of Conformity EU Declaration of Conformity We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare on our sole responsibility that the product: Description Battery-operated chainsaw Brand Husqvarna Type / Model 435i Identification Serial numbers dating from 2024 and onwards...

  • Page 37: Registered Trademarks

    For information relating to noise emissions, refer to Technical data on page 33 . Huskvarna, 2024-01-15 Registered trademarks The word mark and logos are registered trademarks owned by and any use of such marks by Husqvarna is under license. 2190 - 004 - 12.01.2024...
  • Page 38 2190 - 004 - 12.01.2024...
  • Page 39 2190 - 004 - 12.01.2024...
  • Page 40 Original instructions 1143690-26 2024-01-15...

Table of Contents