HealthCare International PhysioGait PG-360 Installation And Operation Manual page 30

Removing the battery Connecting power supply Battery in the docking Inserting the battery into
from controller housing to the docking station station controller housing
Figure 17 - Charging and handling the battery
7.11. Lock button
CAUTION!
After each finished work, press the lock button preventing the launch of therapy device control function.
PHYSIOGAIT therapy device is equipped with height adjustment function lock button (see Fig.18).
LOCK WORK UNLOCK
Figure 18 - Mechanism of protection against unauthorized access
Adjustment function is locked when the power lock button ① is pressed. Control function is enabled when the power
lock button is not pressed ①. Lock release is done by turning the button ① in direction as indicated on its surface.
7.12. Elements of the weight bearing measurement system
The system consists of two devices. Weighing module and operator panel. The table together with two weight
transducers has been provided for use as an indicator of dynamic patient weight bearing used in rehabilitation and gait
reeducation. The task of the weighing module is to measure the unloading of the left and right sides and sending them
to the operator panel. The task of the panel is to communicate with the weighing module and to present the received
data to the operator panel.
7.13. Weighing module
.
① - Indicating LED ② - Reset button ③ - Charger socket
Figure 19 - Weighing module
Page 30 from 44 PhysioGait 2023