Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Betson Quick Shot
Summary of Contents for Betson Quick Shot
- Page 1 Quick Shot Instruction Manual...
- Page 2 WARNING Please read the manual before installation and use. Please put the manual together with the machine.
- Page 3 ATTENTION To have better shooting experience, please do not put the machine under sunshine or near infrared red LED light Before use, please notice the warning decal on the machine. ◆ Danger: It may cause damage if the machine is not handled properly ◆...
-
Page 4: Table Of Contents
Contents Introduction ........................5 I. Introduction of the Product: ..................5 II. Features of the Product: ..................5 Specifications and Technical Parameters ..............6 Accessory list ........................9 How to Move and Position the Machine ..............10 I. How to Move the Machine ..................10 II. -
Page 5: Introduction
Ⅹ.Troubleshooting ....................... 32 Introduction Introduction of the Product: Skill Shooter shooting game is an indoor redemption machine newly developed by our company and especially designed for any FEC or amusement locations. It is novel and beautiful in appearance, safe and reliable, and easy to operate, so it is the most valuable amusement product with a higher coin collecting rate in amusement center. -
Page 6: Specifications And Technical Parameters
Specifications and Technical Parameters 1) Operating Voltage: AC 110V, 50/60 Hz 2) Minimum Power: 500W 3) Maximum Power: 900W Dimensions: W850 × D1930 × H 2480 (mm) 5) Weight: 270Kgs 6) Operating Environment: Temperature (indoors): 0℃～35℃; Humidity: ≤90%； Atmospheric pressure: 86Pa～106Pa. - Page 7 Camera board wiring drawing...
- Page 8 IO board wiring drawing...
-
Page 9: Accessory List
Accessory list For the normal use of the machine, please open the package and carefully check whether the following items are included. The accessory list is below: Name Unit Picture Remark /Specification Power 10A/250V-3M cord Manual English AA33 Please open the package and check whether all accessories are included. If not, please contact the distributor of the machine for check. -
Page 10: How To Move And Position The Machine
How to Move and Position the Machine How to Move the Machine There are trundles under the machine. When moving the machine for a short distance, you should raise foot to make the trundles touch the ground and push the machine. As there will be danger of overturning when the foot hits obstacle on the ground, you should move the foot up as much as you can and pay attention to obstacles ahead and uneven places when moving the machine along the ground. -
Page 11: How To Position The Machine
How to Position the Machine Please place it on flat ground where it won’t slide easily; ➢ Please use the following foot to fix the machine (as shown below) ➢ Loosen the tightly locked nuts of the foot, tighten the bolts of the foot with a wrench, and ➢... -
Page 12: Precautions Before Startup
Precautions before Startup Check parameters of the power supply. Ensure parameters of the machine meet the requirements, or the machine might be damaged or there might be fire accident. Excessive loads on a power socket might cause socket overheat and fire accident. Warning Do not change or replace parts at your will when assembling the machine to prevent... -
Page 13: Wiring And Precautions
Wiring and Precautions Connect one end of the cable to the terminal box of the machine, and connect the other ➢ end to the socket. Connect the power supply according to the voltage on the label, or the machine might be ➢... - Page 14 Attention: The cable cannot be pressed by heavy objects, or it might be easily damaged and cause ➢ short circuit, and even fire disaster. When unplugging the cable, you should grasp the plug instead of the cable. ➢ It is not allowed to directly unplug with wet hands. ➢...
-
Page 15: Installation And Maintenance
Installation and Maintenance Installation and commissioning Please check the accessory list to assemble components before installation; ➢ The ground must be flat and solid. After placing the machine, adjust the feet to the ➢ ground and horizontally fix it; After installation, plug the cable and turn on the machine to check whether each part ➢... -
Page 16: Cleaning
Cleaning Housing ➢ Clean dirt on the surface of the machine with clean and soft cotton cloth. Display ➢ Clean the outside of the display with clean and soft Display screen with no water; anything with acid is forbidden to touch the surface of the display. Exhaust fan ➢... - Page 17 ➢ Do not place objects in the air outlet of the machine. ➢ The blocked air outlet may cause temperature rise inside the machine, affect the normal operation of the game, and even damage the parts. ➢ Do not repair the machine by yourself. It may cause short circuit or malfunction and other failure.
-
Page 18: Instruction On Game
Instruction on game： Control table and game start scene How to play ① Insert coin ② Press “←、→” or shoot to choose single player or multi-player VS mode and game,press “OK” to start ③ Score enough point in programmed time to enter into next game ④... -
Page 19: Menu Setting
Menu setting III. ➢ Basic Settings ②Coin Setting: how many coins for 1 game(from 1-10) ③Tickets: how many point for 1 ticket ④Award Mode: Ticket/Gift/Ticket&Gifts/No payout... - Page 20 ⑤Language: Chinese/English ⑥Free: Free play on/off ⑦Player NO. : The Number of the machine in the linked mode ⑧Demo VOL: Turn on/off the background music ⑨Time-ModeA:The play time of the bottle/fruit game ⑩Time-ModeB:The play time of the target/soldier game ⑪-Continue: The time of continue option ⑫-Time-DemoBGM(MIN)-How many mins to play the background music every time(Need ⑬-Clear Ranking(Rounds)-How many rounds to clear the ranking automatically to turn off the background music first)
- Page 21 ➢ Stage Settings To adjust the sequence of stage and hide stage ➢ Account： To check the total coins,tickets,gifts and reset IO TEST ➢ Correction method: 3 point 1 line(sight bead, break, target) aim and shoot the red dot on the screen(left-up, right-up ,left-down, right-down)
-
Page 22: Camera Correction
Camera correction ②The whole monitor will be displayed on the small screen. If it is not clear, spin the ①Remove the tape and the filter sheet of the camera, then switch on the blue switch camera to left/right to adjust the definition(the monitor image must be cleared to see) ③Press Turn Up/Down Key to adjust the monitor position. -
Page 23: Gun Adjustment
Gun Adjustment Correction method: 3 point 1 line(sight bead,break, target) aim and shoot the red dot on the screen(left-up,right-up,left-down,right-down) Instruction For Regular Drainage Turn off the machine, open the back door underneath. ①... - Page 24 Open ② the back door, there is a red switch underneath the air pump. Spin the red switch to right to drain the water and air. (Only Rotate to right a little bit. If vavle is opened too much the air and water will flow out very quickly while under pressure).
-
Page 25: How To Adjust Air Pressure To Adjust The Gun Vibration Force
How to adjust air pressure to adjust the gun VII. vibration force ① hen the machine is turned on, open the door of air valve regulator on the bottom left Pull up t ② he blue regulator cap. Spin to right to increase the air pressure, left to decrease the air pressure. - Page 26 One end of the LAN cable connected to the left port and another end to 1 of the 8 ports at on the right Then switch on the machines at the same time (otherwise the link up will not work) There is only a shot 10 second Window where the game will actively look for another unit on start up.
- Page 27 IV. Assembly and wire connection plan 1-Top light box - 6x screw type 1 needed -Wire connection: 2x 12V led cable...
- Page 28 2-Left white panel -Fixed with 5x screw type 2 needed -5 screws type 2 and white cap at the front side...
- Page 29 -Wire connection: 1-Air tube 2-LAN cable 3-12V (fan/led light) 4-110 VOLT AC IN 5-110 VOLT AC OUT 6-12V led light...
- Page 30 Left white panel back side - 6 screws type 2 needed Same wire connection wire as the front side...
- Page 31 3-Right white panel -5x screw type 2 needed, same screw connection way as left panel Wire connection: 1x 12V led wire 1x HDMI cable...
- Page 32 Ⅹ. Troubleshooting Reason Error Solution No Image on Monitor on No power to the scree Connect or replace the power cable start up The signal cable is not Connect or replace the signal cable connected or damaged No power to game on The fuse is burned Replace the fuse start up.
Need help?
Do you have a question about the Quick Shot and is the answer not in the manual?
Questions and answers