● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 24. Screw list
Component
Side cover
System board
Wireless card
M.2 2230/2280 solid-state drive
Internal antenna
I/O module
Type-C module
Major components of OptiPlex Micro Plus 7010
The following image shows the major components of OptiPlex Micro Plus 7010.
Screw type
#6-32 (Captive screws)
M3x5
M3x4
M2x3.5
M2x3.5
M3x3
M3x3
or
M2x5, cross type
M3x3
Working inside your computer
Quantity
1
5
3
1
1
3
2
2
27