Yard force LB C20C Original Instructions Manual page 6

GENERAL SAFETY WARNINGS
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following the
tips below:
– Maintain the device in accordance with the instructions
in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your hands in
particular, are kept warm.
– Take regular breaks and move your hands at the same
time to promote circulation.
Electrical safety
• The device may only be connected to a socket that is
correctly installed and grounded.
• The fuse must be a residual current circuitbreaker with
a measured residual current of no more than 30 mA.
• Make sure that the power supply corresponds with
the connection specifications of the device before it is
connected.
• The tool may only be used within the specified
limitations for voltage and power (see type plate).
• Do not touch the mains plug with wet hands! Always
pull out the mains plug at the socket and not by the
cable.
• Do not bend, crush, pull or drive over the power cable,
protect from sharp edges, oil and heat.
• Do not lift the device using the cable or use the cable
for purposes other than intended.
• Check the plug and cable before each use.
• If the power cable is damaged immediately disconnect
the plug.
6