Related Manuals for eRapta T01
Summary of Contents for eRapta T01
- Page 1 HD License Plate Wired Camera System Installation Guide If you have any issues or needs, please contact us at: (T01) sales2@erapta.com...
- Page 2 We recommend that you retain this guide with the system as a ready reference. If you have any question, or if you require technical support, please contact us at this email address: sales2@erapta.com We will respond within 24-hours to provide you with the support you require.
- Page 3 (priority) to us. We will send out to you without cost ASAP. Please mark down our service email address and contact us if needed. Hope that you can be satisfied with the purchase from eRapta. Monitor Size:4.3 inch Option 1...
-
Page 4: Table Of Contents
INSTRUCTIONS MANUAL Table of Contents 1. WHATS IN THE PACKAGE ..............1 2. SPECIFICATIONS.................2 3. SAFETY PRECAUTIONS ..............2 4. SYSTEM INSTALLATION ..............3 4.1 Installation Diagram ................4 4.2 Installation of the Camera ...............4 4.3 Wire Connection ................5 4.4 Other Descriptions ................6 5. -
Page 5: Whats In The Package
Make sure your package includes the following listed items completely. If any item is damaged or missing, contact us at sales2@erapta.com. It would be better if you write down the order number from Amazon, include photos of the damaged or missing part in your email, so that we can handle the problem much more quickly. -
Page 6: Specifications
INSTRUCTIONS MANUAL 2. SPECIFICATIONS Camera Compatibility CVBS Power Supply DC 12-24V Camera Working Current 400 mA 720P Effective Pixels Waterproof Rating IP69K Operating Temperature -4°F~ 149°F Material Metal 4 Pin/ RCA connector Cable 26ft Dimensions 9.4(L)*0.8(W)*1(H) inches Item Weight 0.32 pounds... -
Page 7: Safety Precautions
INSTRUCTIONS MANUAL 3. SAFETY PRECAUTIONS Incorrect installation might cause personal injury or property damage. Contact eRapta customer service for assistance if needed. NOTE: Handle all components with care. Inspect regularly to avoid damage to components and cabling. NOTE: Do not apply excessive force to any of the components contained within this kit. -
Page 8: Installation Diagram
INSTRUCTIONS MANUAL 4.INSTALLATION • Ensure the power supply circuit has circuit protection • Use insulated tools when working with power supply • Use correct safety equipment when working at elevated levels • Please test the product before installation to see if it works properly.If the product works properly after inspection, please install it. -
Page 9: Installation Of The Camera
INSTRUCTIONS MANUAL 4.2 Installation of the Camera 4.2.1 Take off your rear license plate. Using a screwdriver, remove each of the screws holding your rear license plate in place. Then, pull the plate off and set it aside. NOTE : Make sure you place the screws in a safe place so you don’t lose them. -
Page 10: Wire Connection
INSTRUCTIONS MANUAL 4.2.3 Run the camera cable from outside of the car into the trunk of your car. 4.3 Wire Connection 1) Plug the 4Pin cable of the camera cable into the 4Pin connector of the power cable. (Use the arrows to align). - Page 11 INSTRUCTIONS MANUAL 2) Red thin wire connected to your reversing light (positive power), black thin wire connected to metal or ground wire (negative power). NOTE: the power supply for the camera must come from a reversing lights.The power source can also be from the constant 12V power source, but the camera will always be on.
-
Page 12: Other Descriptions
INSTRUCTIONS MANUAL or"video input" in the menus. 4.4 Other Descriptions 4.4.1 The function of the Camera Wire 1) Cut white wire will close the parking guide lines ( default with guide lines). 2) Cut the green wire will switch image to facing front view (default is mirror rear view). -
Page 13: Troubleshooting
INSTRUCTIONS MANUAL 5.TROUBLESHOOTING Q: How should the product be installed? A: Connect the red wire of the power cord to the positive power source of the reversing light and the black wire of the power cord to the ground or negative power source. Here is the video of our product installation: https://youtu.be/asa_laH_06Q Q: Why is the product no signal? ... - Page 14 OK, contact us and we will send one to you. Q: Can the after-sales service support multiple times? A: Sure, if you choose eRapta, we're passionate about providing solutions to your shopping experience, no matter what the problem is. NOTE: ...
-
Page 15: Warranty
INSTRUCTIONS MANUAL 6. Warranty eRapta offers a full 24 months warranty and replacement policy. We also provide lifetime technical support to ensure that you enjoy your modern backup camera for many years to come. To obtain warranty support, or if you are not satisfied in any way, or have any issues with your purchase, please contact us first for help, to instead of return or negative content.
Need help?
Do you have a question about the T01 and is the answer not in the manual?
Questions and answers