Package Contents; Installation Notes - Philips 75BDL8051C User Manual

75BDL8051C/86BDL8051C
Before installing the display
• This product is packed in a carton, together with the standard accessories.
• Any other optional accessories will be packed separately.
• Move the display by at least two (2) adults.
• After opening the carton, ensure that the contents are complete and in good condition.
1.2.

Package Contents

Please verify that you received the following items with your package content:
• LCD display
• Quick start guide
• Remote Control and AAA batteries
• Power cable x3
• RS232 cable x1
• RS232 daisy chain cable x1
• IR sensor cable x1
• HDMI cable x1
• DVI cable x1
• USB A-B cable x1
• Touch Pen x2
• HDMI transmitter x2
• USB Cover x1
• Cleaning cloth x1
• Philips logo plate x1
• M3 screw x2
• M2 screw x2
NOTES:
• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and
complies with the safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm
• Keep the packaging materials appropriately after unpacking the product.
1.3.

Installation Notes

• Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
• The product should be installed on a flat surface, or the product may tip over. Leave a space between the rear of the product
and the wall for proper ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure to
do so may shorten the life of the internal parts.
• Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.
LCD Display
* The supplied power cord varies depending on destination.
Power Cable RS232 Cable
HDMI Cable
DVI Cable
USB Cover Cleaning cloth
* Items may differ in different locations
* Display design and accessories may differ from the images shown.
4
Quick start guide
Remote Control
and AAA Batteries
RS232 Daisy Chain Cable
IR Sensor Cable
USB A-B Cable Touch Pen
M3 screw
Philips logo plate
2
HDMI transmitter
M2 screw
should be used).