Table of Contents
Advertisement
DC
INPUT
connector
-POWER indicator
CHARGING
THE
POWER
indic
CHARGE
ind
CAUTION
To AC outlet
BATTERY
PACK
ator
icator
Connect the AC power cord to a wall outlet.
(The POWER indicator will light.)
Connect
the
VideoMovie
to
the
AC
POWER
ADAPTER
using the provided DC cord.
3 Unplug the AC power cord after finishing operation.
Note:
lf the provided
DC
cord is connected
to the AC POWER
ADAPTER,
the
battery
pack
will
not
be
charged
and
CHARGE
indicator goes off.
Connect the AC power cord to a wall outlet.
(The POWER indicator will light.)
Note:
Be sure to unplug the DC plug before charging the battery pack.
2 Align the marks on the battery pack and adapter.
Slide the battery pack in the direction of the arrow until it
locks in place.
BN:-VSGU 50 min
When
charging is completed, the CHARGE
indicator that is
red turns to green.
3 Unplug the AC power cord.
A WORD
ON THE
EXCLUSIVE
BATTERY
PACKS
The battery packs aren
Give
attention
to the
of their characteristics.
Terminals
Do not sh
ickel-cadmium
batteries.
following
to make the most
Temperature ranges:
The recharging time is based
on room temperature of
20°C (68°F).
The lower the temperature,
the longer the rechraging time.
For charging:
10°C to 35°C (50° F — 95°F)
For operating: -
O°C to 40°C (32°F — 104°F)
For storing:
-10°C to 30°C (14° F — 86°F)
ort-circuit
THE
BATTERY
IS KEPT
UNCHARGED
FOR
SHIPMENT. CHARGE
IT BEFORE
USE.
e@To avoid a hazard:
1.
Do not burn the battery.
2.
Do not short-circuit the terminals.
3. Do not modify or disassemble
4. Use only specified chargers.
the battery.
@ To prevent damage and prolong service life:
1. Avoid dropping and unnecessary shocks.
2.
Avoid repeated charging without first discharging.
@ This unit has a limited service life:
Near the end of its service life, when
it begins to deliver less recording
time per charge, purchase a replacement.
@ it is normai for the battery to be warm
after charging or use.
@ This is a chemical
reaction type battery; its properties are best maintained
under the following conditions:
1. Optimum charging takes place at temperatures between 10°C (50°F)
and 35°C (95°F). Cooler temperatures impede chemical reaction. Warmer
temperatures can prevent complete charging.
2. Store in a cool dry place. Extended exposure to high temperatures will
increase natural discharge and shorten service life.
3.
Total natural discharge may occur during long storage periods (uncharged
storage is preferable; recharge one day before use.)
4. Remove
from charger or powered
unit when
not in use; some units
draw current even when switched off.
Advertisement
Table of Contents
