Operation - Craftsman 247.38923 Operator's Manual

Recoil Starter
Grass Catcher
Side Discharge
Cover
blaDe COnTrOl
The blade control is attached to the upper handle of the mower.
Depress and squeeze it against the upper handle to operate the unit.
Release it to stop engine and blade.
WarninG
This blade control is a safety device. Never attempt to bypass its
operations.
CUTTinG HeiGHT aDjUsTmenT leVer
One adjustment lever is located on the right rear wheel and one is
located on the right front wheel. Both levers have to be at the same
position to ensure a uniform cut. To adjust the cutting height, refer to
the Assembly Section.
Grass CaTCHer
The grass catcher, located at the rear of the mower, is used to bag
the grass clippings for disposal at another site. Once the bag is full,
remove it up through the handles using the strap provided and empty it
before any further mowing.
mUlCH plUG
The mulch plug is used for mulching purposes. Instead of collecting
Craftsman Lawn Mowers conform to the safety standard of the American National Standards Institute (ANSI).

OPERATION

Blade Control
Cutting Height
Adjustment
Lever
Gas Cap
Mulch Cover
Figure 12
meets ansi safety standards
13
Oil Fill
the grass clippings in a grass catcher or using the side discharge
chute, some mower models have the option of recirculating the
clippings back to the lawn. This is called mulching.
siDe DisCHarGe COVer
Your mower is shipped as a mulcher. To discharge the grass clippings
to the side instead, follow the instructions in the Assembly section to
attach the side discharge cover.
WarninG
Keep hands and feet away from the chute area on cutting deck. Refer
to warning label on the unit.
reCOil sTarTer
The recoil starter is attached to the right upper handle. Stand behind
the unit and pull the recoil starter rope to start the unit.
Oil Fill Cap/DipsTiCk
Refer to the Maintenance section for instructions on checking the oil.
Trail sHielD
The trail shield is attached to the rear of the mower and is there to
protect the operator from flying debris. Do not use the mower unless
the shield is fully functional and in place.
Cutting Height
Adjustment
Lever