Advertisement
5.
OPERATION
5.1.
Adjust the solar panel upwards to maximise the amount of direct sunlight collected (fig 4).
5.2.
Rotate the light downwards to obtain maximum coverage (figs 4 & 5).
5.3.
Push the power button to switch on the light (fig 6).
WARNING! To avoid unwanted activation ensure that the light is not positioned so it detects unwanted objects such as road traffic or
‰
people using nearby footpaths.
5.4.
Green light illumination indicates that the floodlight is charging.
FIG.4
6.
MAINTENANCE
6.1.
Wipe clean with soft dry cloth.
DO NOT use solvents.
8
NOTE: The light is a fully sealed unit with no serviceable parts on the
LED16S, However the LED20S, LED30S (fig.7) have 18650 lithium batteries that are
charged from the solar panel. A single battery in the LED20S, and two in the LED30S.
Simply unscrew the battery cap (anticlockwise) and replace when required. Battery
orientation is marked on the rear of the lamp, adjacent to the battery access cap.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
FIG.5
sales@sealey.co.uk
Original Language Version
FIG.6
NOTE: LED30S features a button instead
of a switch.
FIG.7
www.sealey.co.uk
LED16S, LED20S, LED30S
BATTERY
CAP
REGISTER YOUR
PURCHASE HERE
Issue 3 (3)
08/12/23
Advertisement
